OBERDORFER 101M-F13 Centrifugal Pump

Description

Supply high-volume water circulation for deck washdown, inboard-engine cooling, or large-yacht HVAC chillers with the Oberdorfer 101M-F13 Centrifugal Pump. This high-flow close-coupled marine centrifugal pump provides a maximum rated flow of 1,320 GPH (22 GPM / 83.2 LPM), maximum head of 28 ft (8.5 m), and maximum pressure of 12.1 PSI.

Oberdorfer model 101M-F13 uses a 1/3 HP (0.25 kW) continuous-duty motor operating on 115V or 230V AC, 50/60 Hz single-phase power. It has a heavy cast marine-bronze body, semi-open bronze impeller, carbon/ceramic mechanical face seal with stainless hardware, and 3/4-inch NPT suction and discharge ports.

Key Features

• High-flow close-coupled marine centrifugal pump.
• Specified for high-volume deck washdown, inboard-engine cooling, and large-yacht HVAC chiller applications.
• Maximum rated flow of 1,320 GPH, 22 GPM, or 83.2 LPM.
• Maximum rated head of 28 ft (8.5 m) and maximum pressure of 12.1 PSI.
• 1/3 HP (0.25 kW) continuous-duty motor.
• 115V or 230V AC, 50/60 Hz dual-voltage single-phase operation.
• Heavy cast marine-bronze body and semi-open bronze impeller.
• Carbon/ceramic mechanical face seal with stainless hardware.
• 3/4-inch NPT suction and 3/4-inch NPT discharge ports.
• Dry weight of 16 lb (7.2 kg).

Compatibility and Installation

The Oberdorfer 101M-F13 is specified for compatible deck-washdown, engine-cooling, and HVAC-chiller circulation systems. Confirm the selected 115V or 230V electrical configuration, 50/60 Hz supply, circuit protection, plumbing size, required flow, operating head, fluid compatibility, and mounting location before ordering. the listed specifications do not state self-priming capability; configure the inlet for flooded suction unless manufacturer documentation specifies otherwise.

The 1,320 GPH value is a maximum pump rating and installed flow changes with total dynamic head, piping size and length, fittings, strainer condition, discharge restrictions, fluid conditions, and electrical supply. Use appropriate marine intake, seacock, strainer, plumbing, mounting, wiring, and bonding components. Follow manufacturer instructions and qualified marine installation practices for commissioning.

Before Ordering

Verify Oberdorfer model 101M-F13, high-flow close-coupled centrifugal configuration, 1,320 GPH maximum flow, 28 ft maximum head, 12.1 PSI maximum pressure, 1/3 HP continuous-duty motor, 115V or 230V AC 50/60 Hz single-phase power, cast marine-bronze body, semi-open bronze impeller, carbon/ceramic mechanical seal, 3/4-inch NPT suction and discharge ports, 280 x 160 x 175 mm dimensions, 16 lb dry weight, and 1-year limited manufacturer warranty before purchase.