FREE DELIVERY TODAY - Place your 1st order.
OBERDORFER 104M-01F26 Centrifugal Pump
Supplying water to marine ice makers, the OBERDORFER 104M-01F26 delivers 600 GPH at 6.5 PSI, utilizing a compact 1/10 HP 115V motor with bronze construction across 3/8″ ports.
- 600 GPH output feeds ice makers.
- Compact 1/10 HP motor saves space.
- 3/8″ NPT ports fit small tubing.
- Cast bronze casing stops rust formation.
- 15-foot head clears onboard discharge lines.
Products are almost sold out
available only:
5In Stock
Description
Supply water for marine ice makers, small cabin A/C units, or compatible potable-water liquid-transfer systems with the Oberdorfer 104M-01F26 Centrifugal Pump. This low-flow close-coupled marine centrifugal pump provides a maximum rated flow of 600 GPH (10 GPM / 38.0 LPM), maximum head of 15 ft (4.5 m), and maximum pressure of 6.5 PSI.
Oberdorfer model 104M-01F26 has a 1/10 HP (0.07 kW) 3,000 RPM motor operating on 115V AC, 60 Hz single-phase power. It uses a cast marine-bronze body, open bronze impeller, heavy-duty lip-seal and mechanical-seal assembly, plus 3/8-inch NPT suction and discharge ports. The maximum listed liquid temperature is 160 degrees F (71 degrees C).
Key Features
- Low-flow close-coupled marine centrifugal pump.
- Specified for marine ice makers, small cabin A/C units, and compatible potable-water liquid-transfer applications.
- Maximum rated flow of 600 GPH, 10 GPM, or 38.0 LPM.
- Maximum rated head of 15 ft (4.5 m) and maximum pressure of 6.5 PSI.
- 1/10 HP (0.07 kW) motor operating at 3,000 RPM.
- 115V AC, 60 Hz single-phase U.S. electrical requirement.
- Cast marine-bronze body and open bronze impeller.
- Heavy-duty lip-seal and mechanical-seal assembly.
- 3/8-inch NPT suction and 3/8-inch NPT discharge ports.
- Maximum liquid-temperature rating of 160 degrees F (71 degrees C).
Compatibility and Installation
The Oberdorfer 104M-01F26 is specified for compatible ice-maker, compact A/C, and potable-water transfer systems. Confirm 115V AC 60 Hz power, circuit protection, 3/8-inch NPT plumbing, fluid compatibility, required operating flow, system head, liquid temperature, and dry mounting location before ordering. Verify suitability with the complete potable-water system and applicable vessel documentation if used for potable water.
the listed specifications do not state self-priming capability, so use flooded suction unless manufacturer documentation approves another installation arrangement. Actual delivered flow varies with total dynamic head, plumbing diameter and length, fittings, restrictions, fluid conditions, and electrical supply. Do not exceed the listed 160 degrees F liquid-temperature limit. Follow manufacturer instructions for installation, wiring, plumbing, and commissioning.
Before Ordering
Verify Oberdorfer model 104M-01F26, low-flow close-coupled centrifugal configuration, 1/10 HP 3,000 RPM motor, 115V AC 60 Hz single-phase power, 600 GPH maximum flow, 15 ft maximum head, 6.5 PSI maximum pressure, cast-bronze body, open bronze impeller, lip-seal and mechanical-seal assembly, 3/8-inch NPT suction and discharge ports, 160 degrees F maximum liquid temperature, 200 x 130 x 130 mm dimensions, 12 lb dry weight, and 1-year limited manufacturer warranty before purchase.
OBERDORFER 104M-01F26 Centrifugal Pump
| Brand | Oberdorfer |
|---|---|
| Model Code / SKU | 104M-01F26 |
| Country of Origin | USA |
| Pump Category | Low-Flow Close-Coupled Marine Centrifugal |
| Motor Power Output | 0.07 kW (1/10 HP / 0.10 HP) @ 3000 RPM |
| Voltage / Frequency | 115V AC / 60Hz Single-Phase |
| Housing & Impeller Material | Cast Marine Bronze Body with Open Bronze Impeller |
| Shaft Seal Specification | Heavy-Duty Lip Seal / Mechanical Seal Assembly |
| Inlet / Outlet Port Size | 3/8" NPT Suction / 3/8" NPT Discharge |
| Max Flow Rate | 600 GPH (10.0 GPM / 38.0 LPM) |
| Max Head / Pressure | 15.0 ft (4.5 m) / 6.5 PSI |
| Max Liquid Temperature | 71°C (160°F) |
| Dimensions & Dry Weight | 200 x 130 x 130 mm / 5.4 kg (12 lbs) |
| Primary Application | Marine Ice Makers, Small Cabin A/C Units, Potable Water Liquid Transfer |
| Standard Warranty | 1 Year Limited Manufacturer Warranty |
You must be logged in to post a review.
Reviews
There are no reviews yet.