Scot Pump – 35065-2 – 3000 GPH – 115/230V – 50/60Hz – 3.31″ Impeller – Marine Centrifugal Pump

Description

Move high volumes of water for marine engine raw-water cooling, ballast transfer, or bilge-pumping systems with the SCOT Pump 35065-2 Marine Centrifugal Pump. This high-capacity, direct-coupled complete pump unit has a maximum rated flow of 3,000 GPH (50 GPM / 189.2 LPM), maximum head of 50 ft (15.2 m), and maximum pressure of 21.6 PSI.

SCOT Pump model 35065-2 uses a heavy-duty marine cast-bronze housing, 3.31-inch (84 mm) bronze impeller, and heavy-duty mechanical face seal. Its 1 HP continuous-duty 56J-frame C-face motor operates on 115V or 230V single-phase 50/60 Hz power. The pump uses a 1-1/4-inch NPT suction port and 1-inch NPT discharge port.

Key Features

• High-capacity marine centrifugal pump for raw-water cooling, ballast transfer, and high-volume bilge-pumping applications.
• Maximum rated flow of 3,000 GPH, 50 GPM, or 189.2 LPM.
• Maximum rated head of 50 ft (15.2 m) and maximum pressure of 21.6 PSI.
• 115V or 230V single-phase, 50/60 Hz operation.
• 1 HP continuous-duty 56J-frame C-face motor.
• Heavy-duty cast marine-bronze housing and 3.31-inch bronze impeller.
• Heavy-duty mechanical face seal.
• 1-1/4-inch NPT suction inlet and 1-inch NPT discharge outlet.
• Flooded-suction, non-self-priming configuration.
• Dry weight of 28 lb (12.7 kg).

Compatibility and Installation

The SCOT Pump 35065-2 is specified for marine engine raw-water cooling, ballast transfer, and high-volume bilge pumping. Confirm the vessel has compatible 115V or 230V single-phase 50/60 Hz power, appropriate circuit protection, suitable plumbing, and adequate mounting space. the listed 3,000 GPH flow is a maximum pump rating; actual system output changes with total dynamic head, plumbing diameter and length, fittings, strainers, discharge elevation, and electrical supply conditions.

This centrifugal pump requires a flooded-suction installation and is not self-priming. For raw-water or ballast plumbing, use correctly rated marine components and install required intake, shutoff, strainer, and discharge components according to manufacturer instructions and vessel-system requirements. Use qualified personnel for AC wiring, bonding, plumbing, mounting, and commissioning.

Before Ordering

Verify SCOT Pump model 35065-2 complete pump unit, 3,000 GPH maximum flow, 50 ft maximum head, 21.6 PSI maximum pressure, 115V or 230V single-phase 50/60 Hz power, 1 HP continuous-duty 56J-frame C-face motor, cast-bronze housing, 3.31-inch bronze impeller, heavy-duty mechanical face seal, 1-1/4-inch NPT suction port, 1-inch NPT discharge port, flooded-suction requirement, 350 x 185 x 190 mm dimensions, 28 lb dry weight, and 1-year limited manufacturer warranty before purchase.