Scot Pump – 35066-2 – 1500 GPH – 115/230V – 50/60Hz – 3″ Impeller – Marine Centrifugal Pump

Description

Supply baitwell, livewell, low-pressure washdown, or raw-water systems with the SCOT Pump 35066-2 Marine Centrifugal Pump. This direct-coupled marine centrifugal pump delivers a maximum rated flow of 1,500 GPH (25 GPM / 94.6 LPM), with a maximum head of 38 ft (11.6 m) and maximum pressure of 16.5 PSI.

SCOT Pump model 35066-2 combines a heavy-duty cast marine-bronze housing, 3-inch (76 mm) bronze impeller, and mechanical face seal with a 0.33 HP 56J-frame heavy-duty marine-standard motor. It operates on 115V or 230V single-phase 50/60 Hz power and uses a 1-1/4-inch NPT suction port with a 1-inch NPT discharge port.

Key Features

• Direct-coupled marine centrifugal pump for baitwell, livewell, low-pressure washdown, and raw-water supply applications.
• Maximum rated flow of 1,500 GPH, 25 GPM, or 94.6 LPM.
• Maximum rated head of 38 ft (11.6 m) and maximum pressure of 16.5 PSI.
• 115V or 230V single-phase, 50/60 Hz operation.
• 0.33 HP 56J-frame heavy-duty marine-standard motor.
• Heavy-duty cast marine-bronze housing and 3-inch bronze impeller.
• Mechanical face seal.
• 1-1/4-inch NPT suction inlet and 1-inch NPT discharge outlet.
• Flooded-suction, non-self-priming configuration.
• Dry weight of 22 lb (9.9 kg).

Compatibility and Installation

The SCOT Pump 35066-2 is specified for baitwell and livewell circulation, low-pressure marine washdown, and raw-water supply. Confirm compatible 115V or 230V single-phase 50/60 Hz power, suitable circuit protection, compatible fluid, installation location, and plumbing sized for the 1-1/4-inch suction and 1-inch discharge connections. Its 1,500 GPH rating is a maximum pump specification; installed flow varies with total dynamic head, hose or pipe size and length, fittings, strainer condition, elevation, discharge restrictions, and supply voltage.

This model requires flooded suction and is not self-priming. For raw-water applications, install appropriate marine intake, shutoff, strainer, and plumbing components as required by the vessel system and manufacturer instructions. Follow qualified marine electrical and plumbing practices for mounting, wiring, bonding, priming, and commissioning.

Before Ordering

Verify SCOT Pump model 35066-2, direct-coupled configuration, 1,500 GPH maximum flow, 38 ft maximum head, 16.5 PSI maximum pressure, 115V or 230V single-phase 50/60 Hz requirement, 0.33 HP 56J-frame motor, cast-bronze housing, 3-inch bronze impeller, mechanical face seal, 1-1/4-inch NPT suction port, 1-inch NPT discharge port, flooded-suction requirement, 330 x 178 x 180 mm dimensions, 22 lb dry weight, and 1-year limited manufacturer warranty before purchase.