CTM PCX3600 – 3600 GPH – 230V – 50/60HZ – 4.00″ Impeller – Marine Centrifugal Pump

Description

Supply seawater to large-vessel marine A/C and chiller manifolds with the CTM Marine PCX3600 High-Flow Commercial Marine Centrifugal Pump. This commercial marine centrifugal pump provides a maximum rated flow of 3,600 GPH (60 GPM / 13.6 m³/h), maximum head of 50 ft (15.2 m), and maximum pressure of 22.0 PSI.

CTM Marine model PCX3600 uses a cast marine-bronze and reinforced-polymer casing, 4-inch precision-balanced impeller rated for solids up to 2 mm, stainless-steel shaft, and industrial mechanical seal. Its 3/4 HP continuous-duty motor operates on 230V AC, single-phase, 50/60 Hz power. The pump has 1-1/4-inch NPT female inlet and outlet ports, an IP55-rated enclosure, and a maximum liquid-temperature rating of 140 degrees F (60 degrees C).

Key Features

• High-flow commercial marine centrifugal pump for large-vessel A/C and chiller manifolds.
• Maximum rated flow of 3,600 GPH, 60 GPM, or 13.6 m³/h.
• Maximum rated head of 50 ft (15.2 m) and maximum pressure of 22.0 PSI.
• 3/4 HP (0.55 kW) continuous-duty motor.
• 230V AC, single-phase, 50/60 Hz power requirement.
• Cast marine-bronze and reinforced-polymer casing.
• 4-inch precision-balanced impeller with stated 2 mm solids-handling capability.
• Stainless-steel shaft and industrial mechanical seal.
• 1-1/4-inch NPT female inlet and outlet ports.
• IP55-rated enclosure with listed CE certification and ISO 8846 ignition protection.

Compatibility and Installation

The CTM Marine PCX3600 is specified for compatible large-vessel A/C and chiller-manifold circulation systems. Confirm 230V AC, 50/60 Hz single-phase power, appropriate circuit protection, 1-1/4-inch NPT plumbing, required flow at operating head, system fluid, and dry installation location before ordering. The 3,600 GPH rating is a maximum value; actual flow varies with total dynamic head, pipe diameter and length, fittings, strainers, discharge restrictions, fluid conditions, and electrical supply.

the listed data does not state self-priming capability; use flooded suction unless manufacturer documentation approves another configuration. the listed 2 mm solids-handling capability does not remove the need for appropriate intake screening or strainers. Do not exceed the 140 degrees F maximum liquid-temperature rating. Follow manufacturer instructions and qualified marine electrical and plumbing practices for mounting, wiring, bonding, plumbing, and commissioning.

Before Ordering

Verify CTM Marine model PCX3600, high-flow commercial centrifugal configuration, 3,600 GPH maximum flow, 50 ft maximum head, 22.0 PSI maximum pressure, 3/4 HP motor, 230V AC single-phase 50/60 Hz power, cast-bronze and reinforced-polymer casing, 4-inch precision-balanced impeller, stated 2 mm solids handling, stainless-steel shaft, mechanical seal, 1-1/4-inch NPT female ports, IP55 enclosure, 140 degrees F maximum liquid temperature, CE certification, ISO 8846 ignition protection, 340 x 180 x 210 mm dimensions, 28 lb dry weight, and 1-year limited manufacturer warranty before purchase.