FREE DELIVERY TODAY - Place your 1st order.
Grundfos SCALA2 3-45-1 Pressure Booster Pump – 230V, Constant Pressure System (93013250)
Maintaining constant water pressure at fixtures, the Grundfos SCALA2 93013250 delivers 21 GPM at 65 PSI, utilizing an integrated variable-speed motor and self-priming composite housing for quiet yacht plumbing.
- 65 PSI delivers constant shower pressure.
- Variable-speed inverter eliminates water pressure surges.
- Self-priming lift draws water 26 feet.
- 47 dBA operation ensures whisper-quiet cabins.
- NSF 61 certification guarantees potable drinking.
Products are almost sold out
available only:
12In Stock
Description
Maintain constant domestic-water pressure on a yacht with the Grundfos SCALA2 3-45-1 Pressure Booster Pump, model 93013250. This integrated variable-speed self-priming pressure booster is specified for yacht potable-water pressure boosting and multi-head shower supply. It provides a maximum rated flow of 1,260 GPH (21 GPM / 4.8 m³/h), maximum head of 147.6 ft (45.0 m), and adjustable constant pressure up to 65 PSI (4.5 bar).
Grundfos model 93013250 uses a Noryl FE1630PW composite casing, PPO impellers, stainless-steel shaft, and carbon-ceramic mechanical seal. Its 3/4 HP (0.55 kW) permanent-magnet motor has a built-in VFD inverter and operates on 200V to 240V AC, single-phase, 50/60 Hz power. The pump has 1-inch NPT/G swivel connections, is self-priming up to 26 ft (8.0 m), has an IPX4D outdoor rating, and is listed at 47 dB(A).
Key Features
- Integrated variable-speed self-priming pressure booster for yacht potable-water systems.
- Specified for domestic-water pressure boosting and multi-head shower supply.
- Maximum rated flow of 1,260 GPH, 21 GPM, or 4.8 m³/h.
- Maximum head of 147.6 ft (45.0 m).
- Adjustable constant pressure up to 65 PSI (4.5 bar).
- Self-priming suction lift up to 26 ft (8.0 m).
- 3/4 HP permanent-magnet motor with built-in VFD inverter.
- 200V to 240V AC, single-phase, 50/60 Hz power requirement.
- 1-inch NPT/G swivel inlet and outlet connections.
- NSF/ANSI 61, WRAS, and ACS potable-water certifications.
Compatibility and Installation
The Grundfos SCALA2 3-45-1 is specified for potable drinking-water systems only, with a maximum liquid temperature of 113 degrees F (45 degrees C). Confirm that the vessel provides compatible 200V to 240V AC single-phase 50/60 Hz power, appropriate circuit protection, 1-inch NPT/G plumbing, potable-water-compatible piping, required flow, and installation space before ordering. This model is not designed for saltwater, fuel, wastewater, or chemical-transfer use.
Maximum flow and head are pump ratings; actual delivered performance changes with suction lift, pipe diameter and length, fittings, filters, elevation, simultaneous fixture demand, pressure setpoint, and electrical supply. The IPX4D rating does not make the pump submersible. Follow Grundfos instructions for priming, mounting, inlet filtration, wiring, pressure setup, plumbing, and commissioning.
Before Ordering
Verify Grundfos model 93013250 SCALA2 3-45-1, integrated variable-speed self-priming pressure-booster type, potable-water-only use, 1,260 GPH maximum flow, 147.6 ft maximum head, adjustable 65 PSI constant pressure, up-to-26-ft suction lift, 3/4 HP permanent-magnet motor with built-in VFD, 200V to 240V AC single-phase 50/60 Hz power, Noryl casing, PPO impellers, stainless-steel shaft, carbon-ceramic seal, 1-inch NPT/G swivel connections, IPX4D rating, 47 dB(A) listed noise level, 113 degrees F maximum liquid temperature, NSF/ANSI 61, WRAS, and ACS certifications, 403 x 193 x 302 mm dimensions, 22 lb dry weight, and 2-year limited manufacturer warranty before purchase.
Grundfos SCALA2 3-45-1 Pressure Booster Pump – 230V, Constant Pressure System (93013250)
| Brand | Grundfos |
|---|---|
| Full Model Code | 93013250 (SCALA2 3-45-1) |
| Pump Type | Integrated Variable-Speed Self-Priming Pressure Booster |
| Primary Application | Yacht Domestic Potable Water Pressure Boosting, Multi-Head Shower Supply |
| Body & Impeller Material | Noryl FE1630PW Composite Casing with PPO Impellers |
| Shaft Material & Seal Type | Stainless Steel Shaft with Carbon-Ceramic Mechanical Seal |
| Maximum Flow Rate | 1260 GPH (21.0 GPM / 4.8 m³/h) |
| Maximum Head / Pressure | 147.6 ft (45.0 m) / 65.0 PSI (4.5 Bar) Adjustable Constant Pressure |
| Inlet / Outlet Port Size | 1" NPT/G (25.4 mm) Swivel Connections |
| Suction Lift Capability | Self-Priming up to 26.0 ft (8.0 m) |
| Motor & Drive Technology | 0.55 kW (3/4 HP) Permanent Magnet Motor with Built-in VFD Inverter |
| Voltage / Frequency | 200V - 240V AC / 1-Phase / 50/60Hz |
| Ingress Protection & Noise | IPX4D Outdoor Rated / Ultra-Quiet 47 dB(A) Sound Profile |
| Max Liquid Temperature | 45°C (113°F) Potable Drinking Water Only |
| Dry Weight & Dimensions | 10.0 kg (22 lbs) / 403 x 193 x 302 mm |
| Potable Certifications | NSF/ANSI 61, WRAS, ACS Certified |
| Standard Warranty | 2 Years Limited Manufacturer Warranty |
You must be logged in to post a review.

















Reviews
There are no reviews yet.