Raymarine CAM210 Day & Night IP Marine Bullet Camera

Description

Monitor blind spots, boarding areas, and low-light surroundings from a compatible Raymarine display with the CAM210 Day & Night IP Marine Bullet Camera. The compact network camera supports Full HD video, infrared illumination up to 20 meters, and Power over Ethernet, making it useful for backing down, dockside monitoring, security coverage, or watching access points after sunset. Need a rugged fixed-view camera instead of a rotating thermal unit? The CAM210 uses a 2-megapixel Sony CMOS sensor, H.264/MJPEG streaming, and a weather-resistant housing for RayNet/IP network installations.

Key Specifications

• Raymarine CAM210 Day & Night IP Marine Bullet Camera, part number E70347.
• Fixed-view HD marine IP camera with a 2-megapixel 1/2.8-inch Sony CMOS image sensor.
• Supports resolutions up to 1920 × 1080 Full HD and H.264 or MJPEG video streaming.
• Infrared night illumination up to approximately 20 m (65.6 ft).
• Uses RayNet Ethernet/IP networking and supports IEEE 802.3af Power over Ethernet.
• Can also operate from a nominal 12V DC supply.
• Typical maximum power consumption is approximately 5.3W with infrared illumination active.
• IP67 environmental protection with an adjustable bracket for deck or overhead mounting.
• Approximate weight: 2.0 lb (0.9 kg).

Integration

The CAM210 is an IP camera, not a chartplotter or radar. It requires a compatible Raymarine LightHouse MFD or suitable network video viewer, plus a RayNet/IP Ethernet connection. Use a compatible PoE switch or injector for Power over Ethernet, or provide an appropriate 12V DC supply when using local power.

The camera provides a fixed video view and infrared low-light support; it does not provide radar, GPS, collision avoidance, object recognition, or guaranteed night-navigation capability. Use onboard lighting, navigation instruments, and normal visual watchkeeping practices for safe vessel operation.

Installation Notes

Mount the camera where its view is not blocked by rails, antennas, rigging, spray, or deck hardware. Select a location that provides the intended view—such as an engine-space entrance, cockpit, transom, bow, or boarding area—while protecting the Ethernet and power connections from strain, chafe, and standing water.

Use sealed network connections and follow Raymarine power, PoE, and cable-length guidance. The official Raymarine product information lists a 2-megapixel Sony CMOS sensor, support for up to 1920 × 1080 video, H.264/MJPEG streaming, IPX6/IPX7 protection, and 802.3af PoE support. [814]

Before Ordering

Confirm MFD video compatibility, RayNet/IP network capacity, PoE switch or injector availability, required camera field of view, mounting location, cable route, power method, and any needed RayNet adapters before ordering.