Raymarine AIS5000 AIS Transceiver for Maritime First Responders

Description

Equip a maritime first-response or government vessel with a high-performance AIS platform using the Raymarine AIS5000. Its selectable 12.5W or 2W transmit power, multi-channel AIS communications, multi-GNSS receiver, and Ethernet/NMEA connectivity support complex navigation-system integration where dependable AIS data distribution is required. Need a professional AIS transceiver for compatible MFD, ECDIS, and command-system installations? The AIS5000 supports NMEA 2000, multiple high-speed NMEA 0183 ports, Ethernet, USB, Wi-Fi, and Bluetooth in an IPX7-rated housing.

Key Specifications

• Raymarine AIS5000 high-performance AIS transceiver, part number E70650.
• Commercial/tactical AIS transceiver intended for maritime first responders and government vessels.
• Selectable 12.5W or 2W AIS transmit output.
• Marine VHF/AIS frequency coverage from 156.025–174.000 MHz.
• Multi-channel high-speed AIS transmit-and-receive capability.
• Dedicated DSC receiver.
• Integrated multi-GNSS receiver.
• NMEA 2000, multiple high-speed NMEA 0183 ports, Ethernet, USB, Wi-Fi, and Bluetooth connectivity.
• Requires an external MFD, ECDIS, monitor, or compatible display system.
• 9.6V–31.2V DC input with up to approximately 15W maximum power consumption.
• IPX7 protection, operating range of -13°F to 131°F (-25°C to 55°C), and approximately 3.1 lb (1.4 kg) weight.

Integration

The AIS5000 requires suitable AIS/VHF antenna infrastructure, GNSS installation, valid MMSI/static vessel data, and compatible external displays or command systems. It is not a VHF voice radio, radar, chartplotter, EPIRB, or guaranteed collision-avoidance device. Confirm the intended agency, government, or commercial regulatory requirements before ordering.

High-output AIS configuration must comply with vessel authorization, licensing, local regulations, and manufacturer instructions. AIS target data is dependent on radio coverage and other vessels transmitting correct information. It should always be used alongside radar, charts, visual lookout, communications procedures, and safe navigation practices.

Installation Notes

Install the AIS5000 in a dry, protected, accessible equipment location. Use a properly designed VHF/AIS antenna system, mount the GNSS antenna with clear sky view, and route antenna, Ethernet, NMEA, USB, and power cabling away from high-current wiring and RF interference sources.

Use correctly fused 9.6V–31.2V power, configure AIS output power only as authorized, and have a qualified installer program vessel data, MMSI, antenna offsets, NMEA settings, Wi-Fi/Bluetooth security, and connected display interfaces. Verify AIS reception and transmission before operational deployment.

Before Ordering

Confirm regulatory authorization, required output-power configuration, MFD/ECDIS compatibility, AIS/VHF antenna plan, GNSS antenna position, NMEA/Ethernet/USB needs, wireless policy, 12V/24V power capacity, and professional commissioning requirements before ordering.