Honda BF150DLDA 150HP – White iST 20″ Shaft Standard Rotation

Honda BF150DLDA 150HP iST White Digital

The Honda BF150DLDA pairs a 2.4L DOHC inline 4-cylinder engine with the iST digital system, finished in Grand Prix White for modern dual consoles, runabouts, and performance bay boats in Mulmarine’s digital marine engines lineup. The 16-valve DOHC design incorporates VTEC technology, giving a smooth, quiet ride while providing mechanical authority for rapid hull planing.

The Intelligent Shift & Throttle (iST) system gives fly-by-wire command across the 5000-6000 RPM range. This engine uses Honda’s BLAST technology and Programmed Fuel Injection (PGM-FI) for low-end torque and fuel efficiency, with effortless engine synchronization in multi-engine setups.

Massive 2.4L DOHC VTEC Block

The 2.4-liter block gives higher torque and smoother power delivery than standard 150HP competitors with smaller displacements, reducing mechanical stress and vibration.

Intelligent Shift & Throttle (iST)

The iST system gives a cable-free operating experience through digital signal processing, allowing precise vessel positioning and instant response to input.

VTEC Variable Valve Timing

Honda’s VTEC provides a camshaft profile that optimizes valve lift and timing for both low-speed torque and high-speed performance.

Advanced BLAST Torque Technology

Honda’s BLAST technology advances ignition timing during rapid acceleration, cutting the hesitation common in traditional four-stroke outboards for a quicker hole-shot.

Lean Burn Control ECOmo

Honda’s ECOmo system adjusts the air-fuel mixture based on real-time speed and load, running a leaner mixture at cruising speed to maximize fuel economy.

NMEA 2000 Digital Connectivity

This engine is NMEA 2000 certified, displaying fuel flow, RPM, and temperature directly on GPS or multi-function displays.

Honda 5-Year Limited Warranty

This engine carries Honda Marine’s 5-year non-declining limited warranty. Pro Tip: use Honda’s genuine 10W-30 marine oil and regular fresh-water flushing to protect the internal 2.4L block.