Furuno 1815 – 8.4-Inch Color LCD 4kW Radar with 10M Cable

Description

Keep radar operation straightforward with the Furuno 1815, a complete standalone 4 kW radar system that pairs a compact 19-inch radome with an 8.4-inch color LCD display. The dedicated display, tactile controls, and 36 NM range make it a practical choice for coastal cruising, workboats, and operators who prefer a radar screen separate from a multifunction display. Need a conventional magnetron radar with AIS display and target-tracking support? The 1815 provides 24 RPM scanning, Fast Target Tracking, echo trails, and NMEA 0183 connectivity in a complete package with a 10-meter antenna cable.

Key Specifications

• Furuno 1815 standalone 4 kW marine radar system.
• 4 kW magnetron radar with a 19-inch enclosed radome.
• 8.4-inch color LCD radar display.
• Up to 36 NM range scale and 25 m minimum range.
• 5.2° horizontal beamwidth and 25° vertical beamwidth.
• 24 RPM antenna rotation speed.
• Supports Fast Target Tracking, AIS display, echo trails, VRM/EBL, zoom, and auto gain/sea/rain controls.
• NMEA 0183 input/output connection.
• 12V–24V DC operation with approximately 38W maximum power consumption.
• IPX6 radome protection, IP56 display protection, and 100-knot wind rating.
• Approximate weights: 14.3 lb (6.5 kg) radome and 4.9 lb (2.2 kg) bracket-mounted display.

Integration

The Furuno 1815 includes its own radar display and does not require a separate MFD for basic radar operation. A compatible AIS receiver/transponder and NMEA 0183 connection are required for AIS targets. Heading and position data are needed for certain display modes, including course-up, north-up, and true-motion presentation.

Furuno lists the 1815 with a 4 kW transmitter, 19-inch radome, 8.4-inch color LCD, 36 NM range scale, 5.2° horizontal beamwidth, and 24 RPM rotation. [899][907] Its range is an instrumented scale, not a guarantee that all targets will be detected at that distance.

Installation Notes

Mount the 19-inch radome on a rigid, level surface with clear rotation and a practical view around the vessel. Keep it clear of personnel, antennas, rigging, lights, exhaust, masts, and structures that can block or reflect radar energy. Install the display in a protected helm location where its controls are accessible and the screen can be viewed safely.

Route the supplied 10-meter antenna cable and display power cable through protected paths away from heat, chafe, bilge water, high-current wiring, and moving equipment. Follow Furuno requirements for safe distance, compass separation, circuit protection, grounding, and bearing alignment. Radar remains a navigation aid and does not replace proper lookout or safe navigation practices.

Before Ordering

Confirm radome and display mounting space, available 12V/24V power, 10-meter cable-route suitability, NMEA 0183/AIS integration needs, heading and GPS data availability, clear scanner rotation, and qualified installation support before ordering.