Lofrans Project 500 Vertical Windlass, Low Profile, Chrome, 1/4″ HT – 500W – 12V

Description

TheLofrans Project 500is a low-profile vertical gypsy-only windlass with a 500W 12V DC motor. The windlass has a stated maximum pull of 1,389 lbs and a 209 lbs continuous working-load rating. Its mirror-polished chrome-plated bronze housing and AISI 316 stainless steel shaft form the listed deck and drive assembly.

The gypsy accepts 1/4 in high-test or DIN 766 short-link chain. A manual friction brake clutch system controls the listed release and braking function. The provided product data does not confirm an anchor, chain, rope, controls, contactor, or circuit breaker as included.

Key Features of the Project 500 Vertical Windlass

• The 500W 12V DC motor powers low-profile vertical anchor chain retrieval.
• The gypsy accepts 1/4 in high-test chain for confirmed compatibility.
• The gypsy also accepts 1/4 in DIN 766 short-link chain.
• The manual friction brake clutch controls the listed release function.
• The 209 lbs working-load rating identifies the continuous hauling load.
• The 1,389 lbs maximum pull figure states the product’s peak pull rating.
• The rated no-load speed reaches 75 ft/min without a working load.
• The windlass reaches 56 ft/min at its stated working-load rating.
• The motor enclosure carries the listed IP66 ingress-protection rating.
• A 50A circuit breaker is required for electrical protection.

Which Boats This Windlass Fits

The Project 500 vertical windlass is recommended for power and sailboats from 18 to 30 ft. Its gypsy supports 1/4 in high-test or DIN 766 short-link chain. Buyers should verify the exact chain type before ordering because The available product details do not list rope compatibility.

the listed maximum pull is 1,389 lbs. The 209 lbs working-load rating provides the separate continuous hauling value. The continuous figure should guide regular retrieval assessment, while maximum pull remains a peak rating.

Materials, Technology and Use

The mirror-polished chrome-plated bronze housing forms the exposed deck body, while the AISI 316 stainless steel shaft supports the drive assembly. the listed IP66 rating applies to the motor enclosure, and the product data states CE approval. The manual friction brake clutch provides the listed braking and release function.

Salt deposits and debris can still accumulate around chrome-plated bronze, the stainless shaft, the gypsy, and deck hardware. Regular cleaning and inspection remain necessary. The low-profile gypsy-only arrangement does not establish rope compatibility because The available product details do not list rope information.

Compatibility and Installation

The Lofrans vertical windlass fits deck thicknesses from 0.8 to 1.2 in. The unit measures 82 mm above deck with a 130 mm base diameter and weighs 24 lbs. Installers should verify below-deck motor clearance, cable routing, mounting area, and clutch access before installing the windlass.

The 12V DC system requires a 50A circuit breaker. Electrical planning can include battery charger compatibility around the listed voltage and circuit-protection requirement. The provided product data does not state average current draw or confirm controls, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the housing, gypsy, chain, and exposed shaft with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the chain links, friction-clutch area, and deck hardware before operation. Inspect the chain, clutch movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Project 500 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 1/4 in high-test or DIN 766 short-link chain before ordering. You should compare your boat with the 18 to 30 ft application guide, measure deck thickness against the 0.8 to 1.2 in range, and reserve room for the 82 mm above-deck height and 130 mm base diameter. Verify that your boat uses a 12V system and can use the required 50A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.