Lofrans Royal Anodized Horizontal Manual Windlass – 1/4″ HT, 5/16″ HT/BBB/PC, 3/8″ BBB/HT/PC

Description

TheLofrans Royalis a horizontal deck-mounted manual windlass with a single-speed ratchet drive and hand lever. It has a stated maximum manual pull of 882 lbs and a 110 lbs continuous working-load rating. The unit uses a marine anodized aluminum body with an AISI 316 stainless steel drive shaft.

The gypsy supports 1/4 in HT chain, 5/16 in HT, BBB, or PC chain, and 3/8 in BBB, HT, or PC chain. A manual friction clutch controls the listed free-fall release. This mechanical windlass requires no electrical power, and the provided product data does not confirm a hand lever, anchor, chain, rope, or mounting hardware as included.

Key Features of the Royal Manual Windlass

• The single-speed ratchet drive provides the listed manual operating mechanism.
• A hand lever operates the listed manual drive arrangement.
• The gypsy accepts 1/4 in high-test chain.
• The gypsy accepts 5/16 in high-test, BBB, or PC chain.
• The gypsy accepts 3/8 in BBB, high-test, or PC chain.
• The manual friction clutch controls the listed free-fall release function.
• The 110 lbs working-load rating identifies the continuous hauling load.
• The 882 lbs maximum manual pull figure states the peak pull rating.
• The windlass requires no electrical power for its stated operation.
• The unit weighs 22 lbs at the listed dry-weight figure.

Which Boats This Windlass Fits

The Royal manual windlass is recommended for cruisers, classic boats, and bluewater sailboats from 26 to 39 ft. Its gypsy supports only the listed high-test, BBB, and PC chain combinations. Buyers should identify the exact chain diameter and grade before ordering because The available product details do not list rope compatibility.

The 882 lbs maximum manual pull represents the listed peak pull rating. The 110 lbs working-load rating provides the separate continuous hauling figure. These values should not be treated as the same operating limit.

Materials, Technology and Use

The marine anodized aluminum body forms the deck housing, while the AISI 316 stainless steel drive shaft supports the manual drive assembly. The single-speed ratchet and hand-lever mechanism provide the listed mechanical operation. The manual friction clutch controls the listed free-fall release function.

Salt deposits, sand, and debris can still collect on anodized aluminum, the stainless shaft, the gypsy, and deck hardware. Regular cleaning and inspection remain necessary. This model requires no electrical power, so it does not require battery, circuit-breaker, or charger planning.

Compatibility and Installation

The Lofrans manual windlass measures 192 mm high by 222 mm long and weighs 22 lbs. Installers should verify the deck mounting area, structural support, hand-lever clearance, gypsy access, and clutch access before fitting the windlass. The available product details do not list a deck-thickness range or mounting pattern.

The manual configuration has no stated electrical requirement. The provided product data does not confirm the hand lever, anchor, chain, rope, mounting hardware, or clutch handle as included. Consult manufacturer installation documentation for mounting dimensions and hardware requirements before drilling the deck.

Care and Operating Notes

Rinse the housing, gypsy, chain, drive shaft, and friction-clutch area with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the chain links, ratchet mechanism, and deck hardware before operation. Inspect chain condition, hand-lever engagement, clutch movement, visible fasteners, and mounting points before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Royal carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, shipping, mounting hardware, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether your chain is 1/4 in HT, 5/16 in HT, BBB, or PC, or 3/8 in BBB, HT, or PC before ordering. You should compare your boat with the 26 to 39 ft application guide, reserve space for the 192 mm by 222 mm housing, and account for the 22 lbs dry weight. Verify the mounting structure, hand-lever clearance, and clutch access before installation. Confirm the hand lever, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.