AB Oceanus 11 VST – 11-Foot Fiberglass Console Performance RIB

Description

Keep lift capacity, fuel storage, and long-shaft outboard requirements defined with the AB Inflatables Oceanus 11 VST, a 3.50 m, or 11 ft 6 in, performance center-console rigid inflatable boat. Its deep-V hand-laid fiberglass hull uses a double molded deck system, while the deck has an integrated molded non-skid pattern. Three ORCA CSM 1100 dtex buoyancy chambers use cold-cured hand-laminated seams, and the listed net weight is 185 kg, or 408 lb.

The boat has a four-person ISO capacity, a maximum payload of 480 kg, or 1,058 lb, and a built-in 25 L, or 6.6 gal, aluminum fuel tank. A 20-inch long-shaft outboard is required, with 20 HP recommended, 30 HP maximum, and 88 kg, or 194 lb, maximum engine weight. Leafield C7 Push-Push valves and pressure-relief valves are specified, while CE Category C applies to the listed inshore and coastal category.

Key Specifications of the AB Inflatables Oceanus 11 VST Rigid Inflatable Boat

• The performance center-console RIB measures 3.50 m, or 11 ft 6 in, overall and has a listed net weight of 185 kg.
• A hand-laid deep-V fiberglass hull with double molded deck construction defines the stated rigid-hull configuration for this compact console RIB.
• The fiberglass deck uses an integrated molded non-skid pattern, establishing the specified deck-surface arrangement for the supplied console layout.
• Three buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams for the listed inflatable tube construction.
• Maximum ISO passenger capacity is four persons, while the stated maximum payload capacity is 480 kg, or 1,058 lb.
• A 25 L, or 6.6 gal, built-in aluminum fuel tank establishes the listed onboard fuel-storage configuration for this RIB.
• A 20-inch long-shaft outboard is required, with 20 HP recommended and 30 HP maximum power specified for propulsion selection.

Hull, Deck, and Capacity

This AB Inflatables rigid inflatable boat has an internal length of 2.54 m, or 8 ft 4 in, and an internal width of 0.81 m, or 2 ft 8 in. The listed tube diameter is 0.43 m, or 17 in. Its deep-V fiberglass hull, double molded deck system, and three buoyancy chambers establish the stated hull and tube configuration.

Included equipment consists of a fiberglass console with steering system, bow locker with cushion, steering bench seat, built-in fuel tank, LED navigation lights, automatic bilge pump, and stainless steel cleats. Keep passenger loading, payload, fuel capacity, long-shaft outboard selection, engine output, and engine weight within the stated product limits.

Why Choose the AB Inflatables Oceanus 11 VST Rigid Inflatable Boat

The Oceanus 11 VST rigid inflatable boat combines a 3.50 m fiberglass deep-V hull with a double molded deck, center console, 25 L fuel tank, pressure-relief valves, and three ORCA CSM buoyancy chambers. Buyers can compare its 185 kg net weight, four-person ISO capacity, 480 kg payload rating, 20-inch long-shaft requirement, 20 HP recommended power, 30 HP maximum power, and 88 kg engine limit with other compact console RIB configurations.

Setup and Outboard Considerations

The supplied configuration includes the fiberglass console with steering system, bow locker and cushion, steering bench seat, 25 L fuel tank, LED navigation lights, automatic bilge pump, and stainless steel cleats. Confirm the 20-inch long-shaft outboard configuration before rigging, then match engine output to the stated 20 HP recommendation, 30 HP maximum, and 88 kg engine-weight limit. Inflate the three buoyancy chambers through the specified Leafield C7 valves and observe the listed pressure-relief valve arrangement.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and fiberglass hull structure. Mulmarine.com can help you review the 3.50 m hull dimensions, 185 kg net weight, 25 L fuel-tank specification, long-shaft outboard requirement, and stated passenger, payload, and engine limits against your tender, lift, trailer, dock, and propulsion plan before purchase. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the AB Inflatables Oceanus 11 VST Rigid Inflatable Boat

Confirm that your lift, trailer, dock, and storage plan supports the 3.50 m overall length and 185 kg net weight. You should use a 20-inch long-shaft outboard, select 20 HP as the recommended power level, avoid exceeding 30 HP or 88 kg engine weight, confirm the 25 L fuel-tank configuration, and remain within the four-person and 480 kg maximum capacity limits.