OBERDORFER 300B-F13 Self Priming Centrifugal Pump

Description

Provide self-priming water movement for emergency bilge evacuation, marine fire-main, and engine raw-water-circulation systems with the Oberdorfer 300B-F13 Self-Priming Centrifugal Pump. This all-bronze self-priming centrifugal pump provides a maximum rated flow of 1,500 GPH (25 GPM / 94.6 LPM), maximum head of 35 ft (10.7 m), maximum pressure of 15.1 PSI, and a static suction lift up to 15 ft (4.5 m).

Oberdorfer model 300B-F13 uses a 1/3 HP (0.25 kW) heavy-duty electric motor, cast marine-bronze construction, stainless-steel shaft, and carbon/ceramic mechanical face seal. It has 3/4-inch NPT suction and 3/4-inch NPT discharge ports.

Key Features

• All-bronze self-priming marine centrifugal pump.
• Specified for emergency bilge evacuation, marine fire-main, and engine raw-water-circulation applications.
• Maximum rated flow of 1,500 GPH, 25 GPM, or 94.6 LPM.
• Maximum rated head of 35 ft (10.7 m) and maximum pressure of 15.1 PSI.
• Self-priming static suction lift up to 15 ft (4.5 m).
• 1/3 HP (0.25 kW) heavy-duty electric motor.
• Cast marine-bronze construction.
• Stainless-steel shaft.
• Carbon/ceramic mechanical face seal.
• 3/4-inch NPT suction and 3/4-inch NPT discharge ports.

Compatibility and Installation

The Oberdorfer 300B-F13 is specified for compatible bilge, fire-main, and raw-water circulation systems. Confirm the electrical configuration, motor wiring, power source, circuit protection, 3/4-inch NPT plumbing, required flow, operating head, suction-lift requirement, and mounting space before ordering. The 1,500 GPH maximum flow, 35-ft head, and 15-ft suction-lift ratings vary in installed service based on suction plumbing, priming, pipe size and length, fittings, strainer condition, discharge restrictions, and power conditions.

Self-priming performance requires correct initial priming, a leak-free suction line, and a suitable intake arrangement. Use appropriate marine intake, seacock, strainer, plumbing, mounting, electrical, and bonding components. This pump does not independently establish compliance with any required firefighting or emergency-dewatering system; verify the complete installation against vessel requirements and applicable regulations.

Before Ordering

Verify Oberdorfer model 300B-F13, all-bronze self-priming centrifugal configuration, 1/3 HP electric motor, 1,500 GPH maximum flow, 35 ft maximum head, 15.1 PSI maximum pressure, up-to-15-ft static suction lift, cast-bronze construction, stainless-steel shaft, carbon/ceramic mechanical seal, 3/4-inch NPT suction and discharge ports, 355 x 180 x 195 mm dimensions, 30 lb dry weight, intended system application, and 1-year limited manufacturer warranty before purchase.