FREE DELIVERY TODAY - Place your 1st order.
Octopus Autopilot Pump Type 2 – Adjustable Reversing Pump – 12V up to 18 CI Cylinder
Tuning hydraulic response on displacement hulls is straightforward with an Octopus Type 2 linear drive, using an external adjustment screw to dial in reversing flow rates across 9.2 to 18-cu-in cylinders at 12V.
- Adjustable screw tunes steering cylinder speed
- Compatible with 9.2-to-18-cu-in hydraulic cylinders
- Consumes 4A to 8A under load
- Universal wiring integrates major autopilot computers
Products are almost sold out
available only:
11In Stock
Description
Mercury Verado hydraulic steering systems connect to Mk2 pumps through the Simrad Verado Autopilot Fitting Kit with SteadySteer. The kit includes pre-crimped high-pressure hoses and ORB-to-Mercury adaptors for Simrad RPU-80 and RPU-160 Mk2 pumps. SteadySteer provides the listed manual steering override, while AP44, AP48, and compatible MFD autopilot integration support the specified control arrangement.
The kit supports single, dual, triple, and quad Mercury Verado engine configurations. Verify the pump model, hydraulic fittings, hose routing, steering cylinders, and required autopilot controls before installation.
Key Specifications of the Simrad Verado Autopilot Fitting Kit with SteadySteer
- Hydraulic accessory connects Mercury Verado steering systems.
- Simrad RPU-80 and RPU-160 Mk2 pumps are supported.
- SteadySteer provides manual steering override.
- ORB-to-Mercury adaptors connect the hydraulic lines.
- Pre-crimped high-pressure hydraulic hoses are included.
- Single, dual, triple, and quad engine layouts are listed.
- Simrad AP44 and AP48 integration is specified.
- MFD autopilot control integration is listed.
- Hydraulic flow and pressure are not specified.
- 2-Year Standard warranty is specified.
Pump Function, Flow, and Controls
The fitting kit does not include a pump motor or autopilot processor. Its SteadySteer flow switch provides manual steering override while the connected Mk2 pump operates within the hydraulic system. Pump flow rate, pressure, self-priming, dry-run capability, and duty cycle are not specified for this accessory.
Plumbing, Power, and Compatibility Considerations
Verify the Mercury Verado engine arrangement, Simrad pump model, ORB fittings, hydraulic hoses, steering cylinders, AP44 or AP48 controls, and hose routing before installation. Confirm that all required autopilot components are available for the selected steering system.
Mounting, Installation, and Environmental Conditions
Confirm the hydraulic connection points, SteadySteer location, hose routing, fitting access, service clearance, and cable arrangement before installation. Follow the applicable Simrad and Mercury Verado installation documentation.
Warranty and Support
The Simrad Verado Autopilot Fitting Kit with SteadySteer includes a verified 2-Year Standard warranty. These terms reflect currently available manufacturer information, and buyers should verify active warranty policies directly with the seller or manufacturer before purchase.
Before Ordering the Simrad Verado Autopilot Fitting Kit with SteadySteer
Verify the Verado engine count, Mk2 pump, ORB fittings, hydraulic hoses, SteadySteer function, AP44 or AP48 integration, steering-cylinder requirements, and package contents before ordering.
Octopus Autopilot Pump Type 2 - Adjustable Reversing Pump - 12V up to 18 CI Cylinder
| Display Type | N/A (Mechanical Pump) |
|---|---|
| Control Unit | Compatible with major ACUs (Raymarine, Garmin, Simrad) |
| Drive Unit Compatibility | 9.2 cu in to 18 cu in cylinders |
| Max Boat Displacement | Vessel Dependent |
| Steering Type | Hydraulic Reversing |
| Heading Sensor | N/A |
| Operating Voltage | 12V DC |
| Power Consumption (Idle) | N/A |
| Power Consumption (Typical) | 4A - 8A (Load Dependent) |
| Networking (NMEA 2000/0183) | N/A |
| Wireless Capabilities | No |
| Integration (MFD Support) | Via Autopilot Computer |
| Sea State Optimization | N/A |
| Course Accuracy | N/A |
| Rudder Reference Support | Optional Accessory |
| Commissioning Method | Adjustable flow rate screw |
| Waterproof Rating | IP55 (Motor) |
| Operating Temperature | Standard Marine Grade |
| Mounting Options | Horizontal / Vertical foot mount |
| Dimensions (Control Head) | N/A (Pump size: 7.5" length approx) |
| In-box Contents | Type 2 Pump, Installation Manual |
| Key Features | Adjustable flow rate for precise tuning |
You must be logged in to post a review.
Reviews
There are no reviews yet.