Black Oak Nitron XD Pro Full Color Marine Night Vision Camera – Standard Mount – Analog – Black

Description

Add full-color night-vision video to a legacy analog display system with the Black Oak Nitron XD Pro Standard-Mount Analog Camera in Black. Its Starlight sensor is intended for boaters who need a fixed low-light image at the helm but have a monitor or MFD with a composite-video input rather than HDMI. Need a professional camera for nighttime dock approaches or monitoring a fixed area around the boat? The Nitron XD Pro provides analog BNC output, optional Ethernet IP connectivity, and a durable black IP68 housing for deck or hardtop mounting.

Key Specifications

• Black Oak Nitron XD Pro Full Color Marine Night Vision Camera, Standard Mount, Analog, Black, model NITRON-XDP-AN-B-STD.
• Fixed full-color low-light marine camera; it is not a thermal camera.
• Analog composite video output with NTSC/PAL compatibility.
• Analog BNC video output and Ethernet IP connectivity.
• Commercial-grade Starlight sensor in a powder-coated black marine housing.
• IP68 marine-grade enclosure.
• 12V/24V DC input and up to approximately 30W maximum power consumption.
• Operating temperature range of -22°F to 140°F (-30°C to 60°C).
• Approximate dimensions: 6.5 × 8.0 inches; approximate weight: 7.5 lb (3.4 kg).
• Standard deck or hardtop flat-mount base.

Integration

This Nitron XD Pro version requires a compatible composite-video display, MFD input, analog monitor, or supported Ethernet IP video viewer. Verify NTSC/PAL format, BNC/RCA adapter needs, display compatibility, and cable lengths before installation. It is not a radar, chartplotter, GPS receiver, thermal camera, or NMEA 2000 device.

Low-light camera performance varies with ambient light, fog, rain, spray, glare, lens condition, target contrast, and mounting angle. The camera may supplement situational awareness but does not guarantee detection or identification of hazards or replace safe watchkeeping practices.

Installation Notes

Mount the fixed camera in a stable location with a clear view of the intended coverage area. Test the image before drilling because the unit does not pan, tilt, or zoom. Keep it away from exhaust, deck-light glare, heavy spray, antennas, rails, rigging, and radar equipment that could obstruct the view.

Route the BNC/Ethernet and 12V/24V power cables in protected paths away from heat, abrasion, standing water, high-current wiring, and moving components. Use sealed cable entries, a properly protected power circuit, and corrosion-resistant hardware.

Before Ordering

Confirm analog-video input type, NTSC/PAL format, BNC/RCA adapter requirements, display or Ethernet compatibility, black-housing preference, 12V/24V power supply, fixed mounting location, and cable route before ordering.