Black Oak Nitron XR1 Color Night Vision Camera – Analog – Black

Description

Match a dark hardtop or radar arch while adding low-light color video with the Black Oak Nitron XR1 Analog Camera in Black. This fixed marine camera uses the same 1920 × 1080 low-light imaging platform as the white version, helping crews view a selected area during night docking, channel transits, and after-dark fishing activity. Looking for a color night-vision camera that plugs into an analog video input instead of an Ethernet network? The XR1 uses a 42° field of view, 12V power, and a black IP67-rated housing for permanent boat installation.

Key Specifications

• Black Oak Nitron XR1 Color Night Vision Camera, Analog, Black, SKU XR1-ANALOG-B.
• Fixed ultra-low-light color marine camera with 1920 × 1080 Full HD video capability.
• Approximately 42° horizontal field of view.
• Analog composite-video connection through a 4-pin quick-connect/BNC-style harness; verify monitor or MFD compatibility.
• 12V DC operating input with published current draw of approximately 1.3A.
• IP67 weather protection and operating temperature range of -22°F to 140°F (-30°C to 60°C).
• Black marine-grade housing for surface or hardtop-base installation.
• Included harness length may vary by package revision; verify the supplied cable length before ordering.
• 2-year manufacturer warranty, subject to applicable terms.

Integration

The XR1 requires a compatible analog-video monitor, MFD input, or video interface. It does not connect through NMEA 2000 or standard IP video networking and does not include a display. Verify the display’s composite-video format, connector type, and adapter requirements before installing the camera.

Black Oak describes the XR1 as a full-color low-light camera with a 42° field of view and IP67 housing, available in black, white, and gray finishes. [872][883] Low-light video can help supplement awareness, but performance is influenced by ambient light, glare, rain, fog, spray, lens condition, target contrast, and camera placement.

Installation Notes

Choose a stable mounting surface that provides a clear fixed view of the intended area. Test the image before permanent installation and keep the lens clear of rails, rigging, antennas, deck lights, exhaust outlets, and spray-heavy zones. Use sealed connectors, protected wire routing, and a properly fused 12V DC circuit.

Rinse salt deposits from the exterior when appropriate, keep the lens clean, and inspect mounting hardware, seals, and cable connections regularly. Do not use the camera as a replacement for proper visual watchkeeping or navigation procedures.

Before Ordering

Confirm analog-video input support, connector and adapter needs, black-housing preference, 12V supply, intended field of view, cable length, and secure mounting location before ordering.