Furuno DRS6ANXT Solid State Doppler Radar w/Pedestal, 15M Cable & 3.5 Open Array

Description

The Furuno DRS6A-NXT Solid-State Doppler Radar System is a 3.5-foot open-array radar package for compatible Furuno NavNet TZtouch, TZtouch2, and TZtouch3 multifunction displays. It combines a 25W solid-state pulse-compression pedestal, 3.5-foot open-array antenna, and 15 m signal cable to provide Target Analyzer Doppler processing, Fast Target Tracking, Bird Mode, RezBoost beam sharpening, and longer-range radar coverage. The narrow open-array beam helps improve angular target separation compared with a compact radome.

The system provides a maximum instrumented range of up to 72 NM and a typical 2.3-degree horizontal beamwidth, with an effective narrower beam available through RezBoost in supported configurations. It operates from 12V or 24V DC and supports 24, 36, and 48 RPM rotation speeds; dual-range operation is limited to 24 RPM. Practical target detection depends on installation height, array clearance, weather, sea state, radar settings, target size, heading data, and local interference.

Key Specifications

• Furuno 3.5-foot open-array solid-state pulse-compression Doppler radar system.
• Includes radar pedestal, 3.5-foot open-array antenna, and 15 m signal cable.
• Uses 25W solid-state output with Target Analyzer Doppler, Fast Target Tracking, Bird Mode, and RezBoost support.
• Provides a maximum instrumented range of up to 72 NM.
• Uses a typical 2.3-degree horizontal beamwidth, with an effective 1.9-degree beamwidth through RezBoost in supported configurations.
• Supports 24, 36, and 48 RPM rotation speeds, with dual-range operation limited to 24 RPM.
• Requires a compatible Furuno NavNet TZtouch, TZtouch2, or TZtouch3 MFD and Furuno Ethernet radar connection.
• Operates from 12V or 24V DC, weighs approximately 22 kg as a complete 3.5-foot scanner assembly, and has IP56 protection.

Radar Integration

The DRS6A-NXT requires a compatible Furuno NavNet MFD and Furuno Ethernet connection for radar-video display and scanner control. NMEA 2000 can supply compatible GPS, heading, AIS, autopilot, and sensor data, but it is not the radar-video connection. Confirm display compatibility, software version, available Ethernet port, supplied 15 m cable-route suitability, and any required network accessories before purchase.

Target Analyzer Doppler can help highlight approaching and receding targets, while Bird Mode and Fast Target Tracking depend on display configuration, target conditions, radar settings, and antenna installation. Radar overlay and tracking functions require compatible heading and position data where applicable. Radar is a navigation aid and does not replace a proper lookout, safe speed, official charts, local notices, or collision-regulation compliance.

Installation Considerations

Mount the pedestal and 3.5-foot rotating antenna on a rigid level platform with sufficient structural capacity and complete open-array rotation clearance. Install the scanner at a practical height above the waterline, align it parallel to the waterline, and keep it clear of crew, masts, rigging, antennas, lights, exhaust, and other obstructions. Maintain manufacturer-specified personnel safe distance and compass-safe distance. Route the supplied 15 m cable away from heat, chafe, bilge water, high-current wiring, and moving equipment. Radar installation and commissioning should be completed by a qualified marine-electronics technician.

Warranty and Saltwater Care

Furuno warranty coverage varies by region, distributor, proof of purchase, product registration, installation method, commissioning status, and intended use. Confirm applicable local warranty terms, exclusions, and authorized-service requirements before purchase.

The scanner is designed for marine exposure and has IP56 ingress protection, but this does not guarantee immunity from saltwater corrosion. Rinse salt deposits with fresh water where appropriate, avoid high-pressure spray at cable glands and antenna joints, inspect the pedestal, radiator array, mounting hardware, fasteners, cable seals, and platform regularly, and use compatible marine-grade hardware plus suitable isolation methods to reduce galvanic-corrosion risk.

Before Ordering

Confirm compatible Furuno NavNet TZtouch, TZtouch2, or TZtouch3 MFD support, Furuno Ethernet radar network, suitability of the included 15 m cable route, 12V or 24V supply, 3.5-foot array rotation clearance, mounting-platform strength, mounting height, personnel and compass-safe-distance requirements, heading and GPS source for overlay or tracking, optional AIS integration, software compatibility, and qualified installation requirements before purchase.