Icom MA-510TR AIS Transponder w/Antenna & 4.3 Display

Description

See AIS targets and manage essential vessel information directly from the helm with the Icom MA-510TR Class B AIS Transponder. Its 4.3-inch color display, 2W CSTDMA AIS transmission, included GPS antenna, and integrated individual DSC calling give boaters a self-contained AIS solution for coastal cruising, sailing, and offshore passages. Need AIS capability without relying entirely on a chartplotter screen? The MA-510TR supports NMEA 2000, NMEA 0183-HS, and USB connections while providing day and night display modes.

Key Specifications

• Icom MA-510TR Class B AIS transponder with GPS antenna.
• 2W Class B CSTDMA AIS transmit-and-receive capability.
• Dual-channel AIS operation across 156.025–162.025 MHz.
• 4.3-inch color TFT wide-angle LCD with day and night display modes.
• Included external GNSS/GPS antenna.
• Integrated individual DSC call function for compatible connected VHF radio systems.
• NMEA 2000, high-speed NMEA 0183, and USB connectivity.
• 9.6V–31.2V DC input with up to approximately 1.5A maximum current draw.
• IPX7 display protection and operating range of 5°F to 131°F (-15°C to 55°C).
• Approximate dimensions: 7.9 × 4.9 × 4.1 inches; approximate weight: 1.5 lb (0.7 kg).
• Flush-mount or bracket-mount installation options.

Integration

The MA-510TR requires an AIS/VHF antenna or manufacturer-approved splitter, programmed MMSI and static vessel data, and suitable GNSS antenna placement. It is not a VHF voice radio, radar, chartplotter, EPIRB, or collision-avoidance guarantee. The individual DSC call function requires a compatible VHF DSC radio connected through the appropriate interface.

AIS target data depends on VHF coverage and on other vessels transmitting correct information. AIS does not represent every vessel, buoy, floating object, or hazard. In the U.S., enter a valid MMSI and follow applicable FCC/USCG rules before activating AIS transmission; Channel 70 is reserved for DSC, while Channel 16 is used for distress, safety, and calling. [926][928]

Installation Notes

Install the display in a protected helm location where it can be read and operated safely. Mount the supplied GNSS antenna with an unobstructed sky view, use a properly installed AIS/VHF antenna or approved splitter, and route RF, GNSS, data, and power cables away from high-current wiring and interference sources.

Use correctly fused 9.6V–31.2V DC power, configure the NMEA interfaces, and program accurate MMSI, vessel name, call sign, dimensions, and antenna offsets. A qualified marine-electronics technician should verify AIS reception, AIS transmission, DSC-call integration, and target display before regular use.

Before Ordering

Confirm MMSI registration, AIS antenna or splitter needs, compatible VHF DSC radio support, NMEA 2000/NMEA 0183-HS integration, mounting method, GNSS antenna location, 12V/24V power capacity, and required programming support before ordering.