FREE DELIVERY TODAY - Place your 1st order.

Until the end of the sale:
00
days
00
hours
00
minutes
00
sec.

Raymarine ClearCruise Augmented Reality Marine Pack

Overlaying AIS targets and navigation waypoints onto live video feeds, the Raymarine ClearCruise AR kit pairs an AR200 10Hz multi-GNSS sensor with a CAM210 1080p IP bullet camera, operating over SeaTalkng networks at 2.4 lbs.

  • AR200 sensor stabilizes 10Hz augmented reality overlays
  • 1080p CAM210 bullet camera clarifies navigation marks
  • LightHouse 4 integration streams live telemetry feeds
  • IP67 weatherproof housing protects camera components
$820.00

Products are almost sold out

This product is about to run out

available only:

12

In Stock

Wholesale Price
Request for Quotation
Add to wishlist
Compare
SKU: RAY-AR-PACK Category: Brand:
SKU:

RAY-AR-PACK

Description

Overlay compatible navigation information on a live forward-facing video view with the Raymarine ClearCruise Augmented Reality Marine Pack. The kit combines the AR200 GPS/AHRS stabilization sensor with a CAM210 IP camera to help compatible Raymarine Axiom displays align AIS targets, waypoints, and navigation objects with the camera image. Want a more intuitive way to compare chart information with the water ahead? This ClearCruise AR package uses 1080p video, 10 Hz attitude and position data, and RayNet/SeaTalkng connectivity for a connected Raymarine helm.

Key Specifications

  • Raymarine ClearCruise Augmented Reality Marine Pack, part number E70483.
  • Includes an AR200 GPS/AHRS stabilization sensor and CAM210 HD IP camera.
  • Camera supports up to 1920 × 1080 Full HD live video.
  • AR200 supports GPS, GLONASS, Galileo, and BeiDou satellite systems.
  • 10 Hz update rate for compatible position, heading, pitch, roll, and rate-of-turn data.
  • Supports ClearCruise AR overlays for compatible AIS targets, waypoints, and navigation information.
  • Uses RayNet Ethernet for camera video and SeaTalkng/NMEA 2000 for sensor-network integration.
  • Camera supports PoE; AR200 is powered through the SeaTalkng network.
  • Camera and sensor protection ratings vary by component; confirm installation requirements in the current Raymarine manual.

Integration

The pack requires a compatible Raymarine Axiom-family MFD with supported LightHouse software, compatible vector charts, a functioning RayNet/SeaTalkng network, and properly configured AIS data for AIS overlays. It is not a replacement for a chartplotter, AIS receiver, radar, GPS backup, or navigation instruments.

Raymarine states that the AR200 provides GPS position, compass heading, pitch, and roll data to compatible Axiom displays; used with a compatible marine camera, it enables stabilized ClearCruise augmented-reality video. [856] Overlay accuracy depends on camera alignment, heading calibration, GNSS reception, current chart data, and correctly configured vessel sensors.

Installation Notes

Mount the CAM210 where it has an unobstructed forward view and is clear of rails, lights, antennas, rigging, exhaust, and heavy spray. Install the AR200 with clear GNSS sky view and away from magnetic interference, high-current wiring, and vibration. Carefully follow camera alignment and heading-calibration procedures before using overlays.

Use suitable RayNet, SeaTalkng, NMEA 2000, and PoE components, keeping all cables protected from heat, chafe, water, and electrical interference. ClearCruise AR is an awareness feature and does not replace lookout duties, radar, charts, sound signals, or safe navigation practices.

Before Ordering

Confirm Axiom-family MFD and LightHouse compatibility, supported cartography, RayNet/SeaTalkng capacity, AIS data availability, camera and AR200 mounting locations, PoE requirements, GNSS sky view, and needed cables or adapters before ordering.

Raymarine ClearCruise Augmented Reality Marine Pack

BrandRaymarine
Full Model SKU / CodeE70483
Device TypeClearCruise Augmented Reality (AR) Hardware & Software Expansion Pack (AR200 Video Stabilization Sensor + CAM210 IP Camera)
Display SizeN/A (Compatible Raymarine Axiom MFD Required)
Display Resolution1920 x 1080 pixels (Full HD Video Feed Overlay)
Display TypeN/A
GPS Receiver / GNSSHigh-Precision GPS / GLONASS / Galileo / Beidou Receiver (via AR200 Sensor)
Receiver Update Rate10 Hz
Position Accuracy< 2.5 meters CEP
Preloaded Maps / ChartsN/A
Chart CompatibilityRaymarine LightHouse 3 / LightHouse 4 MFDs
Waypoints / Routes / Track LogN/A
NMEA Network CompatibilityRaymarine SeaTalkng / NMEA 2000 & Ethernet (RayNet)
Wireless ConnectivityNone
Sonar SpecificationsAR200 Stablization Sensor Module + HD Marine Bullet Camera (CAM210) with AR Overlays for Navigation Objects and AIS Targets
Waterproof RatingIP66 / IP67 (Camera & Sensor Modules)
Operating Voltage Range12 / 24 V DC
Power ConsumptionMax 6 W combined
Operating Temperature-25°C to 55°C (-13°F to 131°F)
Dimensions (ø x L)Camera: 70 x 145 mm (2.7 x 5.7 in) / Sensor: 100 x 100 x 50 mm
Dry Weight1.1 kg (2.4 lbs) total bundle weight
Mounting OptionsSurface Deck / Mast Mount (Camera) & Flat Deck / Rail Mount (AR200 Sensor)

Reviews

There are no reviews yet.

Be the first to review “Raymarine ClearCruise Augmented Reality Marine Pack”

You may also like…

Shopping Cart

No products in the cart.

Free Shipping on All Orders Over $1,000

Log in

You dont have an account yet? Register Now

Type the product you want to search for and press enter.