FREE DELIVERY TODAY - Place your 1st order.
Raymarine CAM210 Augmented Reality Pack w/AR200 & CAM210
Overlaying AIS targets and navigation waypoints onto video, the Raymarine CAM210 AR camera pairs an IP67 bullet camera with an AR200 10Hz multi-GNSS AHRS sensor across SeaTalkng networks at 2.65 lbs.
- AR200 module overlays 10Hz augmented reality
- 1080p camera clarifies navigation fairway markers
- Infrared LEDs illuminate targets to 20m
- IP67 weatherproof housing survives deck washdowns
Products are almost sold out
available only:
11In Stock
Description
Add stabilized video and navigation overlays to a compatible Raymarine Axiom display with the CAM210 Augmented Reality Pack. The kit pairs a CAM210 HD IP camera with the AR200 GPS/AHRS sensor, allowing ClearCruise augmented-reality graphics to align compatible AIS targets, waypoints, and navigation objects over the live video view. Want a more intuitive way to relate chart data to what is ahead of the boat? This package combines Full HD camera video, 10 Hz position-and-attitude data, RayNet networking, and infrared night illumination for a connected Raymarine helm.
Key Specifications
- Raymarine CAM210 Augmented Reality Pack, part number E70537.
- Includes a CAM210 fixed HD IP bullet camera and AR200 GNSS/AHRS augmented-reality stabilization sensor.
- Camera supports up to 1920 × 1080 Full HD video with infrared illumination for close-range low-light viewing.
- AR200 supports GPS, GLONASS, Galileo, and BeiDou satellite systems with a 10 Hz update rate.
- AR200 provides position, heading, pitch, roll, and rate-of-turn data to compatible Axiom displays.
- AR200 SBAS position accuracy is rated at less than 5 m at 95%; accuracy without SBAS is rated at less than 15 m at 95%.
- Uses RayNet Ethernet for camera video and SeaTalkng/NMEA 2000 for supported AR200 sensor connections.
- Camera supports Power over Ethernet; AR200 is powered from the SeaTalkng network.
- Camera enclosure is IP67 class; AR200 sensor is rated IPX6/IPX7.
Integration
ClearCruise AR requires a compatible Raymarine Axiom, Axiom Pro, or Axiom XL display running suitable LightHouse software, the AR200 sensor, a compatible IP camera, and compatible vector charts. AIS overlays require an AIS receiver or transceiver connected to the system. The camera and AR200 sensor do not replace a chartplotter, radar, AIS receiver, or navigation instruments.
Raymarine specifies that the AR200 supplies GPS position, compass heading, pitch, and roll data to Axiom displays and enables stabilized augmented-reality video when paired with a compatible marine camera. [856] Overlay positions and camera alignment depend on correct installation, calibrated heading, reliable GNSS reception, current charts, and properly configured AIS data.
Installation Notes
Mount the CAM210 with an unobstructed forward or intended-area view, avoiding rails, antennas, rigging, lights, exhaust, and heavy spray. Install the AR200 where it has a clear view of the sky, away from magnetic interference and sources of vibration. Follow Raymarine alignment procedures carefully; inaccurate camera orientation or heading calibration can reduce overlay accuracy.
Use RayNet Ethernet and appropriate PoE equipment for the camera, plus SeaTalkng/NMEA 2000 connections for the AR200. Protect all cables from heat, chafe, moisture, and high-current wiring. Augmented reality is an awareness feature and does not replace visual lookout, radar, charts, navigation rules, or prudent seamanship.
Before Ordering
Confirm Axiom-family MFD compatibility and software, supported vector charts, AIS data availability, RayNet/SeaTalkng network capacity, PoE needs, camera and AR200 mounting locations, GNSS sky view, heading-calibration process, and required cables or adapters before ordering.
Raymarine CAM210 Augmented Reality Pack w/AR200 & CAM210
| Brand | Raymarine |
|---|---|
| Full Model SKU / Code | E70537 |
| Device Type | Marine Augmented Reality Camera & Sensor Kit (CAM210 + AR200) |
| Display Size | N/A (Connects to Raymarine Axiom MFD Displays) |
| Display Resolution | 1920 x 1080 pixels (1080p High Definition) |
| Display Type | N/A |
| GPS Receiver / GNSS | Included AR200 Module features Multi-GNSS Receiver (GPS, GLONASS, Galileo, BeiDou) |
| Receiver Update Rate | 10 Hz |
| Position Accuracy | < 2.5 m RMS (SBAS enabled) |
| Preloaded Maps / Charts | N/A |
| Chart Compatibility | N/A |
| Waypoints / Routes / Track Log | N/A |
| NMEA Network Compatibility | RayNet Ethernet / NMEA 2000 / SeaTalkng |
| Wireless Connectivity | None |
| Sonar Specifications | HD Video Bullet Camera with Infrared Night Vision LEDs (up to 20m range) and AR200 AHRS Stabilizer Sensor |
| Waterproof Rating | IP67 (Camera Enclosure) / IPX6 (AR200 Module) |
| Operating Voltage Range | 12 / 24 V DC (Power over Ethernet - PoE supported) |
| Power Consumption | Max 5.0 W |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Dimensions (ø x L) | 167 x 84 x 84 mm (6.5 x 3.3 x 3.3 in) |
| Dry Weight | 1.2 kg (2.65 lbs) |
| Mounting Options | Adjustable Surface / Deck Mount Bracket & AR200 Pole/Surface Mount |
You must be logged in to post a review.













Reviews
There are no reviews yet.