FREE DELIVERY TODAY - Place your 1st order.
FLIR JCU-2 Joystick Controller
Controlling multi-camera pan, tilt, and zoom from one station, this FLIR JCU-2 joystick controller routes Ethernet communication across a backlit rubber keypad, consuming under 3W within an IPX6 console flush mount at 1.0 lb.
- Ergonomic joystick delivers precise pan-tilt command
- Backlit keypad enables clear night operation
- IPX6 waterproof casing protects flush helms
- Controls multi-camera networks over single Ethernet
Products are almost sold out
available only:
9In Stock
Description
Take faster control of a compatible FLIR camera system with the FLIR JCU-2 Joystick Controller. Its tactile joystick, backlit keypad, and status LEDs give operators a dedicated way to manage camera pan, tilt, zoom, and modes from the helm, especially when rough water or low-light conditions make touchscreen control less convenient. Need a physical command station for an FLIR M-Series or Multicam installation? The JCU-2 uses a wired Ethernet/serial connection and supports flush or surface installation in a protected console location.
Key Specifications
- FLIR JCU-2 Joystick Controller, part number 432-0046-00.
- Remote joystick command unit for compatible FLIR M-Series and Multicam camera systems.
- Backlit rubber keypad with status-indicator LEDs.
- Supports compatible pan, tilt, zoom, and camera-mode controls.
- Wired Ethernet and serial communication; no wireless connectivity.
- 12V/24V DC supply or network-powered operation, depending on the camera system configuration.
- Less than 3W power consumption.
- IPX6 weather protection for supported flush or surface mounting.
- Operating range of -13°F to 131°F (-25°C to 55°C).
- Approximate dimensions: 5.3 × 3.4 × 3.2 inches; approximate weight: 1.0 lb (0.45 kg).
Integration
The JCU-2 is a controller only; it does not provide camera video, thermal imaging, charting, radar, or a display. It requires a compatible FLIR camera, appropriate Ethernet network configuration, and a monitor or MFD to view the camera feed. Confirm exact compatibility because FLIR control protocols and supported features can vary among M-Series generations.
The controller helps operate compatible camera functions but does not replace any safety equipment or navigation procedure. Video monitoring remains dependent on the connected camera, display, network, and vessel sensor configuration.
Installation Notes
Mount the controller where it remains easy to reach from the helm without obstructing steering, throttle, or other vessel controls. Route network and power wiring through protected paths away from heat, water accumulation, sharp edges, moving equipment, and high-current wiring. Use sealed cable entries and follow FLIR instructions for power and network configuration.
Confirm the flush-mount cutout or surface bracket location before drilling. A qualified marine-electronics installer should complete camera pairing, network addressing, and final function testing.
Before Ordering
Confirm the exact FLIR camera model, JCU-2 compatibility, desired control functions, available Ethernet/serial connection, power method, dashboard space, mounting approach, and cable length before ordering.
FLIR JCU-2 Joystick Controller
| Brand | FLIR Systems |
|---|---|
| Full Model SKU / Code | 432-0046-00 |
| Device Type | Remote Joystick Control Unit (JCU) for FLIR M-Series / Multicam Systems |
| Display Size | N/A (Dedicated Command Controller) |
| Display Resolution | N/A |
| Display Type | Backlit Rubber Keypad with Status Indicator LEDs |
| GPS Receiver / GNSS | N/A |
| Receiver Update Rate | N/A |
| Position Accuracy | N/A |
| Preloaded Maps / Charts | N/A |
| Chart Compatibility | N/A |
| Waypoints / Routes / Track Log | N/A |
| NMEA Network Compatibility | Ethernet / Serial Communication Protocol |
| Wireless Connectivity | None (Wired Network Connection) |
| Sonar Specifications | N/A (Pan, Tilt, Zoom, and Camera Mode Control Pad) |
| Waterproof Rating | IPX6 (Weatherproof Console Flush / Surface Mount) |
| Operating Voltage Range | 12 / 24 V DC (Powered via Network / External Supply) |
| Power Consumption | < 3 W |
| Operating Temperature | -25°C to 55°C (-13°F to 131°F) |
| Dimensions (ø x L) | 135 x 88 x 82 mm (5.3 x 3.4 x 3.2 in) |
| Dry Weight | 0.45 kg (1.0 lbs) |
| Mounting Options | Dashboard Flush Mount or Surface Bracket Mount |
You must be logged in to post a review.













Reviews
There are no reviews yet.