Black Oak Nitron XR1 Color Night Vision Camera – Analog – White

Description

Bring a clearer color view to nighttime docking and coastal runs with the Black Oak Nitron XR1 Analog Camera in White. Its ultra-low-light sensor delivers 1920 × 1080 color video through a simple analog connection, making it a practical option for boats with an available composite-video input on the MFD or monitor. Need a compact fixed camera that does not require a network-video installation? The XR1 combines a 42° field of view, IP67 protection, and a white marine-grade housing for hardtop or surface mounting.

Key Specifications

• Black Oak Nitron XR1 Color Night Vision Camera, Analog, White, SKU XR1-ANALOG-W.
• Fixed low-light color marine camera with 1920 × 1080 Full HD video capability.
• Approximately 42° horizontal field of view.
• Analog video connection through a 4-pin quick-connect/BNC-style video harness; confirm display input compatibility.
• 12V DC operating input; published current draw is approximately 1.3A.
• IP67 weather protection and operating temperature range of -22°F to 140°F (-30°C to 60°C).
• White marine-grade housing for surface or hardtop-base mounting.
• Includes a 20-foot or 25-foot harness depending on package revision; verify included harness length before ordering.
• Covered by a 2-year manufacturer warranty, subject to applicable terms.

Integration

The XR1 is a fixed analog camera, not a radar, chartplotter, GPS receiver, thermal imager, NMEA 2000 device, or Ethernet IP camera. It requires a compatible MFD, monitor, or video interface with an analog/composite video input. Confirm NTSC/PAL support and any required BNC, RCA, or display-specific adapters before installation.

Black Oak specifies 1920 × 1080 color video, a 42° field of view, IP67 protection, 12V DC operation, and an analog connection that requires a compatible display video input. [876][883] The camera supports added visual awareness but does not replace radar, navigation lights, current charts, lookout duties, or safe vessel operation.

Installation Notes

Mount the camera where its fixed field of view covers the needed area, such as the bow, stern, dockside approach, or cockpit. Test the picture before drilling because the camera does not pan or tilt. Avoid glare from deck lights, exhaust soot, heavy spray, rails, antennas, or structures that could block the lens.

Route the 12V power and analog video connections in protected paths away from heat, chafe, standing water, moving components, and high-current wiring. Use marine-grade fasteners, sealed cable entries, and suitable circuit protection. Clean the lens and inspect cable seals regularly after saltwater use.

Before Ordering

Confirm analog video input compatibility, required connector adapters, 12V power availability, white-housing preference, fixed viewing direction, mounting location, cable route, and included harness length before ordering.