E-Z Anchor Puller Captain 3 HD 27′ Boat Drum Winch

Description

TheE-Z Anchor Puller Captain 3 HDis a horizontal captive drum winch with an 1,100W 12V DC motor. It has a stated structural peak pull of 4,350 lbs and a 650 lbs continuous working-load rating. Marine-grade 316 stainless steel forms the spool base, drum, and core plates.

The drum holds up to 260 ft of 1/2 in rope with 20 ft of 1/4 in chain. the listed rode specification uses 1/2 in double-braid or three-strand nylon with 1/4 to 5/16 in G4 chain. An emergency free-fall clutch provides the listed manual-drop function.

Key Features of the Captain 3 HD Drum Winch

• The 1,100W 12V DC motor powers horizontal captive-drum anchor retrieval.
• The drum holds 260 ft of 1/2 in rope.
• the listed capacity includes 20 ft of 1/4 in chain.
• The rode accepts 1/2 in double-braid or three-strand nylon.
• The rode specification accepts 1/4 to 5/16 in G4 chain.
• The oil-bath worm gear uses a stated 40:1 self-locking ratio.
• The emergency clutch provides the listed manual free-fall drop function.
• The 650 lbs working-load rating identifies the continuous hauling load.
• The 4,350 lbs figure states the structural peak pull rating.
• A 100A breaker protects the listed 65A working-load current draw.

Which Boats This Drum Winch Fits

The Captain 3 HD drum winch is recommended for heavy aluminum boats and sportfishers from 24 to 32 ft. Its captive drum uses the listed 1/2 in double-braid or three-strand nylon rope with 1/4 to 5/16 in G4 chain. Buyers should match both rope and chain to the listed capacity before ordering.

The 4,350 lbs figure is identified as structural peak pull. The 650 lbs maximum working load provides the separate continuous hauling value. The continuous rating is the relevant figure for normal retrieval planning.

Materials, Technology and Use

The spool base, drum, and core plates use marine-grade 316 stainless steel. The heavy-duty oil-bath worm gear has a stated 40:1 self-locking ratio. The emergency free-fall clutch provides the listed manual-drop function.

Salt deposits, sand, and debris can still collect around the drum, rope, chain, exposed hardware, and drive area. Regular cleaning and inspection remain necessary. Follow manufacturer documentation for oil-bath gearbox service and clutch operation.

Compatibility and Installation

The E-Z Anchor Puller windlass operates from 12V DC, draws 65A at the listed working load, and requires a 100A circuit breaker. The unit weighs 54 lbs. The available product details do not list mounting dimensions, deck thickness, or included controls, so installers should consult manufacturer documentation before routing cables or drilling mounting holes.

the listed working-load current can be considered alongside windlass charging design during electrical planning. The provided product data does not confirm a control switch, contactor, anchor, rope, chain, or circuit breaker as included.

Care and Operating Notes

Rinse the drum, rope, chain, stainless steel hardware, and surrounding deck area with fresh water after saltwater exposure. Remove salt, sand, mud, and debris before operation. Inspect the rope, chain, emergency clutch, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for oil-bath gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Captain 3 HD carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, rope, chain, shipping, controls, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your rode uses 1/2 in double-braid or three-strand nylon with 1/4 to 5/16 in G4 chain. You should compare your boat with the 24 to 32 ft application guide, allow for the 54 lbs unit mass, and verify the mounting arrangement through manufacturer documentation. Confirm that your 12V system supports the listed 65A draw at working load with a 100A circuit breaker. Verify package contents with the seller before ordering.