Lewmar H2G Windlass (Gypsy) 12v 8mm – For Boats Up to 48 Ft., Max Pull: 1433 lbs.

Description

A horizontal gypsy-only layout gives theLewmar H2Ga 700W 12V DC anchor rode retrieval system. The windlass has a stated maximum pull of 1,433 lbs and a 360 lbs continuous working-load rating. Cast 316 stainless steel forms the casing and drive shaft for the listed 8 mm DIN 766 or ISO 4565 chain configuration.

The gypsy accepts 12 to 14 mm three-strand rope with the listed 8 mm chain standards. A free-fall friction system provides the listed rode-release function, and the manual override provides a separate control feature. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Key Features of the H2G Horizontal Windlass

• The 700W 12V DC motor powers horizontal anchor rode retrieval.
• The gypsy accepts 8 mm DIN 766 or ISO 4565 chain.
• The rope section handles 12 to 14 mm three-strand rope.
• The friction system provides the listed free-fall rode-release function.
• The manual override provides a separate stated manual-control feature.
• The 360 lbs working-load rating identifies the continuous hauling load.
• The 1,433 lbs maximum pull figure states the product’s peak pull rating.
• The rated no-load speed reaches 69 ft/min without a working load.
• The windlass reaches 56 ft/min at its stated working-load rating.
• A 90A slow-blow breaker is required for circuit protection.

Which Boats This Windlass Fits

The H2G horizontal windlass is recommended for power and sailboats up to 48 ft. Its gypsy requires 8 mm DIN 766 or ISO 4565 chain paired with 12 to 14 mm three-strand rope. The chain standard, chain size, and rope diameter must match the confirmed gypsy compatibility before ordering an anchor rode.

The 1,433 lbs figure represents the listed maximum pull rating. The 360 lbs working-load rating provides the separate continuous hauling value. Buyers should use the working-load figure when assessing regular anchor retrieval requirements.

Materials, Technology and Use

Cast 316 stainless steel forms the casing and drive shaft. The product data describes the unit as an IP67 sealed marine unit. The free-fall friction system provides the listed rode-release function, while the manual override provides a separate documented control option.

Salt deposits and debris can still gather around the stainless steel casing, gypsy, and deck hardware. Regular cleaning and inspection remain necessary. The gypsy-only layout handles the matched anchor rode without a separate warping drum.

Compatibility and Installation

The Lewmar horizontal windlass fits deck thicknesses from 1.0 to 2.0 in. It measures 218 mm high by 245 mm long and weighs 38.5 lbs. Installers should check mounting space, cable routing, below-deck access, and manual override access before beginning installation.

The 12V DC system draws an average of 80A and requires a 90A slow-blow breaker. The electrical layout should account for charging load considerations alongside the listed current and breaker requirements. The provided product data does not confirm a switch, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the casing, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and free-fall friction system before operation. Inspect chain links, rope condition, manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The H2G carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode combines 8 mm DIN 766 or ISO 4565 chain with 12 to 14 mm three-strand rope. You should compare your boat with the up-to-48-ft application guide, measure deck thickness against the 1.0 to 2.0 in range, and reserve space for the 218 mm by 245 mm housing. Verify that your 12V system supports the listed 80A average draw and required 90A slow-blow breaker. Confirm controls, circuit-protection hardware, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.