Lewmar Pro 1000H Windlass (Gypsy) – For Boats 20 to 45 ft. Max Pull: 1000 lbs.

Description

TheLewmar Pro 1000Huses a 700W 12V DC motor in a horizontal above-deck gypsy-only configuration. The windlass has a stated maximum pull of 1,000 lbs and a 250 lbs continuous working-load rating. Its cast 316 stainless steel casing and drive shaft form the listed housing and drive assembly for 5/16 in G4 chain with 9/16 in three-strand rope.

A manual free-fall release controls the listed rode-release function, while the emergency manual override provides a separate recovery option. The unit fits deck thicknesses from 0.8 to 1.5 in. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Key Features of the Pro 1000H Horizontal Windlass

• The 700W 12V DC motor powers horizontal anchor rode retrieval.
• The gypsy accepts 5/16 in G4 chain for confirmed chain compatibility.
• The rope section handles 9/16 in three-strand rope in the matched rode.
• The manual release provides the listed free-fall rode-release function.
• The emergency manual override provides a separate stated recovery option.
• The 250 lbs working-load rating identifies the continuous hauling load.
• The 1,000 lbs maximum pull figure states the product’s peak pull rating.
• The rated no-load speed reaches 105 ft/min without a working load.
• The windlass reaches 88 ft/min at its stated working-load rating.
• A 70A circuit breaker is required for electrical circuit protection.

Which Boats This Windlass Fits

The Pro 1000H horizontal windlass is recommended for coastal and offshore boats from 20 to 45 ft. Its gypsy requires 5/16 in G4 chain with 9/16 in three-strand rope. The chain and rope sizes must match the confirmed gypsy configuration because the windlass handles the connected sections of the anchor rode.

the listed maximum pull is 1,000 lbs. The 250 lbs working-load rating identifies the separate continuous hauling figure. Buyers should use the continuous rating when assessing regular retrieval loads instead of treating peak pull as ongoing capacity.

Materials, Technology and Use

Cast 316 stainless steel forms the above-deck casing and drive shaft. the listed IP67 complete watertight deck-unit rating applies to the installed deck assembly. The manual free-fall release manages the listed rode-release function, and the emergency manual override provides a separate stated recovery option.

Salt deposits and debris can still collect around the stainless steel casing, gypsy, and rope-to-chain transition. Regular cleaning and inspection remain necessary. The gypsy-only configuration manages the anchor rode and does not include a separate warping drum.

Compatibility and Installation

The Lewmar horizontal windlass fits deck material from 0.8 to 1.5 in thick. It measures 146 mm high by 178 mm long and weighs 19 lbs. Installers should verify mounting space, cable routing, and access to the manual release and emergency override before beginning installation.

The 12V DC system draws an average of 50A and requires a 70A circuit breaker. the listed electrical load can be reviewed with battery charging strategy during installation planning. The provided product data does not confirm a switch, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the stainless steel casing, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and free-fall release area before operation. Inspect chain links, rope condition, manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Pro 1000H carries a 5-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode combines 5/16 in G4 chain with 9/16 in three-strand rope. You should compare your boat with the 20 to 45 ft application guide, measure deck thickness against the 0.8 to 1.5 in range, and reserve space for the 146 mm by 178 mm housing. Verify that your 12V electrical system supports the listed 50A average draw and required 70A circuit breaker. Confirm controls, circuit-protection hardware, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.