Lewmar V1 Vertical Windlass Gypsy Anchor Winch Unit

Description

TheLewmar V1uses a 700W 12V DC motor in a low-profile vertical gypsy-only deck configuration. The windlass has a stated maximum pull of 1,000 lbs and a 250 lbs continuous working-load rating. Its cast 316 stainless steel deck unit houses a precision worm-spur gearbox with a 65:1 reduction ratio.

The gypsy accepts 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand or 8-plait rope. The product data confirms emergency manual retrieve capability. The provided product data does not confirm a free-fall mechanism, ingress-protection rating, deck thickness range, dimensions, anchor, rode, switch, contactor, or circuit breaker as included.

Key Features of the V1 Vertical Windlass

• The 700W 12V DC motor powers vertical rope-to-chain anchor rode retrieval.
• The gypsy accepts 5/16 in DIN 766 or ISO 4565 chain.
• The rope section handles 9/16 in three-strand or 8-plait rope.
• The worm-spur gearbox uses the listed 65:1 reduction ratio.
• The manual override supports the listed emergency manual retrieve function.
• The 250 lbs working-load rating identifies the continuous hauling load.
• The 1,000 lbs maximum pull figure states the product’s peak pull rating.
• The rated no-load speed reaches 82 ft/min without a working load.
• The system requires a 70A circuit breaker for electrical protection.
• The current draw is 35A at the listed working-load rating.

Which Boats This Windlass Fits

The V1 vertical windlass is recommended for mid-size boats from 28 to 36 ft. Its gypsy requires 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand or 8-plait rope. The chain standard, chain diameter, and rope size should match the listed compatibility information before selecting anchor rode components.

The 1,000 lbs figure is the listed maximum pull rating. The 250 lbs working-load rating provides the separate continuous hauling value. Buyers should use the continuous rating when reviewing normal retrieval needs.

Materials, Technology and Use

The deck unit uses cast 316 stainless steel, and the worm-spur gearbox combines the listed drive architecture with a 65:1 reduction ratio. The product data confirms emergency manual retrieve capability. It does not provide an ingress-protection rating, free-fall feature, or additional clutch specification.

Salt deposits, sand, and debris can still collect around stainless steel deck hardware, the gypsy, and the anchor rode. Regular cleaning and inspection remain necessary. Follow manufacturer documentation for any service procedures related to the gearbox or manual retrieve system.

Compatibility and Installation

The Lewmar vertical windlass operates from a 12V DC supply and requires a 70A circuit breaker. The product data states 35A current draw at the working-load rating. The available specifications do not provide deck thickness, overall dimensions, or below-deck clearance, so installers should consult manufacturer installation documentation before drilling or routing cables.

Electrical planning can include battery charging preparation while accounting for the listed breaker and current-draw values. The provided product data does not confirm controls, contactor, circuit breaker, anchor, chain, or rope as included.

Care and Operating Notes

Rinse the stainless steel deck unit, gypsy, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the chain links and rope-to-chain transition before operation. Inspect the anchor rode, visible fasteners, manual retrieve access, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, gearbox service, disassembly, and approved replacement parts.

Warranty and Support

The V1 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand or 8-plait rope. You should compare your vessel with the 28 to 36 ft application guide and verify that the 12V electrical system supports the listed 35A current draw at WLL with a required 70A circuit breaker. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and below-deck clearance because the provided product data does not include those details. Confirm package contents with the seller if you require controls, circuit protection, anchor, chain, or rope.