Lewmar V2G Vertical Windlass Gypsy Only 5/16 G4 & 1/2 – For Boats 30 – 40 Ft., Max. Pull: 1433 lbs

Description

Built around a 700W 12V DC motor, theLewmar V2Gprovides vertical deck-mounted anchor rode handling for sail and power boats from 30 to 40 ft. This gypsy-only model reaches a rated maximum pull of 1,433 lbs and carries a 359 lbs continuous hauling-load rating for regular retrieval assessment.

The precision-cast 316 stainless steel body and high-tensile stainless shaft support the drive assembly above and below deck. The package includes a reversing contactor, guarded rocker switch, circuit breaker, and clutch handle. It uses a rope-to-chain gypsy for 5/16 in G4 or G43 chain with 1/2 in three-strand or 8-plait rope, while the anchor and rode require separate purchase.

Key Features of the V2G Vertical Windlass

• The 700W 12V DC motor powers retrieval through the vertical drive assembly.
• The gypsy accepts 5/16 in G4 or G43 chain for matched rode systems.
• The rope section handles 1/2 in three-strand or 8-plait rope.
• The 359 lbs working-load rating guides continuous hauling expectations during regular anchor recovery.
• Maximum rated pull reaches 1,433 lbs under stated maximum-load conditions.
• The cone clutch supports Fast-Fit free-fall and manual override control.
• The IP67 deck unit provides stated protection against water ingress.
• The motor draws an 80A average load during powered operation.
• A 90A slow-blow breaker protects the required electrical circuit.
• The package includes a contactor, rocker switch, breaker, and clutch handle.

Which Boats This Windlass Fits

The V2G vertical windlass fits sail and power boats from 30 to 40 ft. Its rope-to-chain gypsy works with 5/16 in G4 or G43 chain paired with 1/2 in three-strand or 8-plait rope. Correct chain grade, chain diameter, rope diameter, and rope construction allow the rode components to engage the gypsy as intended.

The 1,433 lbs figure represents maximum rated pull, while the 359 lbs figure represents the continuous hauling load. Boat owners should use the continuous rating when assessing regular anchor retrieval loads and retain the maximum-pull figure as a stated peak capacity.

Materials, Technology and Use

The precision-cast 316 stainless steel body places corrosion-resistant material at the exposed deck location, while the high-tensile stainless shaft forms part of the drive system. The IP67 rating identifies water-ingress protection for the deck unit. Salt residue, sand, and chain debris can still collect around the gypsy and deck hardware, so marine use requires regular cleaning and inspection.

The cone clutch controls the Fast-Fit free-fall system, allowing the operator to release the rode through the clutch mechanism. The included clutch handle supports manual override. As a gypsy-only configuration, this unit handles the compatible anchor rode but does not add a capstan drum for separate line work.

Compatibility and Installation

The Lewmar vertical windlass requires a 12V DC electrical supply, draws an average of 80A, and uses the included circuit breaker rated at 90A slow-blow protection. Installers should confirm onboard battery capacity and charging support before completing the electrical layout. The included reversing contactor and guarded rocker switch support controlled operation.

Installers should match the gypsy to 5/16 in G4 or G43 chain and 1/2 in three-strand or 8-plait rope. The product data does not state a deck-thickness range, mounting pattern, overall dimensions, or below-deck clearance requirement, so the installer must verify these details from the manufacturer installation documentation before cutting or drilling the deck.

Care and Operating Notes

Rinse the exposed stainless steel housing, gypsy, chain, and rope with fresh water after saltwater use to remove salt deposits and abrasive debris. Boat owners should inspect the chain links, rope section, rope-to-chain splice, clutch movement, and manual override before operation. Check the rocker switch, contactor connections, circuit breaker, and 12V cables for corrosion, heat damage, or loose connections. Follow the manufacturer manual for lubrication, service intervals, and approved replacement parts.

Warranty and Support

The V2G carries a 3-year limited manufacturer warranty. Before shipment, technicians inspect electrical operation, clutch engagement, and gypsy function, then confirm the contactor, guarded rocker switch, circuit breaker, and clutch handle accompany the unit. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode combines 5/16 in G4 or G43 chain with 1/2 in three-strand or 8-plait rope before ordering. You should verify that the boat falls within the 30 to 40 ft application guide, confirm available 12V battery capacity for the listed 80A average draw, and plan for the required 90A slow-blow circuit protection. Review manufacturer installation documentation for deck thickness, mounting dimensions, and below-deck clearance because the available product data does not provide those measurements.