Maxwell HRC10-8 Free Fall 12v Horizontal Windlass for 5/16″ Chain & 9/16″ Line

Description

TheMaxwell HRC10-8uses a 1,000W 12V DC motor in a horizontal above-deck windlass with an automatic free-fall system. The windlass has a stated maximum pull of 1,540 lbs and a 550 lbs continuous working-load rating. Its anodized alloy housing uses stainless steel fasteners.

The gypsy accepts 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. The patented Wave Design free-fall control clutch includes manual release. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Key Features of the HRC10-8 Horizontal Windlass

• The 1,000W 12V DC motor powers horizontal rope-to-chain rode retrieval.
• The gypsy accepts 5/16 in short-link chain for confirmed compatibility.
• The rope section handles 9/16 to 5/8 in rope.
• The rope configuration accepts three-strand or 8-plait construction.
• The Wave Design clutch provides the listed free-fall release function.
• The manual release provides a separate stated clutch-control feature.
• The 550 lbs working-load rating identifies the continuous hauling load.
• The 1,540 lbs maximum pull figure states the product’s peak pull rating.
• The rated no-load speed reaches 79 ft/min without a working load.
• A 100A circuit breaker is required for electrical protection.

Which Boats This Windlass Fits

The HRC10-8 horizontal windlass is recommended for mid-size powerboats and sailboats from 30 to 45 ft. Its gypsy requires 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. The chain link type and rope diameter must match the listed configuration for the gypsy to manage the connected rode.

the listed maximum pull is 1,540 lbs. The 550 lbs working-load rating provides the separate continuous hauling value. Boat owners should consider the continuous rating when assessing normal retrieval loads.

Materials, Technology and Use

The heavy-duty anodized alloy housing forms the deck unit, while stainless steel fasteners support the listed assembly. The IP66 rating applies to the listed marine deck protection, and the product data states CE approval. The Wave Design clutch controls the listed free-fall release function.

Salt residue and debris can still collect around anodized alloy, stainless fasteners, the gypsy, and rope-to-chain transition. Regular cleaning and inspection remain necessary. The manual release provides the listed separate clutch-control feature.

Compatibility and Installation

The Maxwell horizontal windlass measures 215 mm high by 310 mm long and weighs 44 lbs. Installers should verify mounting space, cable routing, free-fall clutch access, and manual-release access before installing the unit. The available product details do not list a deck-thickness range.

The 12V DC system requires a 100A circuit breaker. Electrical planning can include windlass charging review around the listed voltage and breaker requirement. The provided product data does not state average current draw or confirm controls, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the housing, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and Wave Design clutch area before operation. Inspect chain links, rope condition, clutch movement, manual-release access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The HRC10-8 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. You should compare your boat with the 30 to 45 ft application guide and reserve space for the 215 mm by 310 mm housing. Verify that your boat uses a 12V system with the required 100A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.