Raymarine Quantum Q24C Wi-Fi Radar 15M Cable Kit

Description

The Raymarine Quantum Q24C Radar 15 m Power Cable Kit is a power-only cable for compatible Quantum Q24C and Quantum 2 radar scanners. It provides a dedicated 15 m DC power connection between the radar scanner and the vessel electrical system. This cable does not carry radar video or Ethernet data, so wired radar installations require a separate compatible RayNet data cable.

The 15 m cable is suited to installations where the scanner-to-power-source route exceeds shorter cable options. Quantum radar systems can use Wi-Fi for supported wireless radar-display connections or RayNet Ethernet for wired radar networking, depending on scanner and MFD compatibility. Confirm the exact Quantum model, power route, cable length, power supply, and chosen Wi-Fi or wired RayNet configuration before purchase.

Key Specifications

• Fifteen-meter power-only cable for compatible Raymarine Quantum Q24C and Quantum 2 radar scanners.
• Supplies DC power only and does not carry radar video, Ethernet data, or NMEA 2000 data.
• Designed for compatible 12V or 24V Quantum radar power arrangements.
• Requires a separately selected compatible Quantum radar scanner.
• Wi-Fi radar operation may not require a separate data cable when supported by the complete Quantum and Raymarine MFD system.
• Wired radar video and control require a separately selected compatible RayNet Ethernet data cable.
• Does not include a radar scanner, display, RayNet cable, power circuit protection, mount, or network hardware.
• Uses marine-grade cable construction for protected onboard routing.

Radar Integration

This cable supplies scanner power only. Quantum radar data and control use either compatible Wi-Fi or RayNet Ethernet, depending on the selected radar and MFD installation. SeaTalkng or NMEA 2000 can provide compatible GPS, heading, AIS, autopilot, and sensor data, but radar video does not travel over NMEA 2000.

Confirm whether the complete radar system will use a Wi-Fi connection or a wired RayNet data connection. A compatible Raymarine MFD is required for radar display and operation. Radar is a navigation aid and does not replace a proper lookout, safe speed, official charts, local notices, or collision-regulation compliance.

Installation Considerations

Route the 15 m cable through protected areas away from heat, sharp edges, moving equipment, bilge water, high-current wiring, and electromagnetic interference sources. Ensure the cable reaches the power source without tension, unsafe extensions, or unsupported sections. Use appropriate fuse or breaker protection and maintain strain relief plus fully sealed connector engagement at the radar scanner. Radar installation and commissioning should be completed by a qualified marine-electronics technician.

Warranty and Saltwater Care

Raymarine warranty coverage varies by region, distributor, proof of purchase, product registration, installation method, and intended use. Confirm applicable local warranty terms, exclusions, and service procedures before purchase.

The cable is intended for marine use, but connector sealing does not guarantee protection from saltwater corrosion. Keep connectors clean and dry, avoid high-pressure spray at cable glands and joints, rinse salt deposits with fresh water where appropriate, inspect the cable jacket and terminals regularly, and replace damaged or corroded components rather than using unapproved repairs.

Before Ordering

Confirm a compatible Raymarine Quantum Q24C or Quantum 2 scanner, required 15 m power-cable route, 12V or 24V supply, suitable fuse or breaker, Wi-Fi or RayNet data-network configuration, separate RayNet cable requirement where applicable, protected cable-routing path, connector compatibility, and qualified installation requirements before purchase.