Raymarine Cyclone Pro Pedestal – 110W

Description

The Raymarine Cyclone Pro Radar Pedestal, SKU E70623, is a 110W solid-state CHIRP pulse-compression radar pedestal for a compatible Raymarine Cyclone Pro open-array system. It requires a separately selected three-foot, four-foot, or six-foot Cyclone Pro radiator array, compatible Raymarine multifunction display, RayNet Ethernet connection, power wiring, and a structurally suitable radar mounting platform. This product is a pedestal only and cannot operate as a complete radar system by itself.

The Cyclone Pro pedestal supports Doppler target highlighting, ARPA tracking, Bird Mode, and fast scanner rotation up to 100 RPM when installed with the correct antenna array and compatible Raymarine display. Its 110W solid-state output is designed to provide long-range radar performance up to 96 NM instrumented range. Practical target detection varies substantially with array length, mounting height, target characteristics, weather, sea conditions, radar settings, and installation quality.

Key Specifications

• Raymarine Cyclone Pro 110W solid-state radar pedestal only, SKU E70623.
• Requires a separately selected compatible three-foot, four-foot, or six-foot Cyclone Pro open-array radiator.
• Uses CHIRP pulse-compression radar with 110W peak output.
• Supports Doppler target highlighting, ARPA target tracking, Bird Mode, and rotation speeds up to 100 RPM.
• Provides up to 96 NM maximum instrumented range when used as part of the complete Cyclone Pro system.
• Requires a compatible Raymarine MFD and RayNet Ethernet radar connection.
• Operates from 10.2V to 31.2V DC; typical power consumption is 95W, maximum consumption is 195W, and standby consumption is 30W.
• Weighs approximately 25.6 kg and requires a rigid open-array mounting platform.

Radar Integration

The E70623 pedestal needs a compatible Cyclone Pro antenna array, Raymarine Axiom, Axiom+, Axiom 2, Axiom Pro, or other approved RayNet display, plus RayNet Ethernet and power connections. NMEA 2000 or SeaTalkng can provide compatible heading, GPS, AIS, and autopilot data, but radar-video data is carried by RayNet Ethernet.

ARPA and radar overlay require compatible heading and position data where applicable. Doppler processing can help highlight moving targets, but its effectiveness depends on radar settings, target movement, sea clutter, weather, and installation conditions. Radar is a navigation aid and does not replace a proper lookout, safe speed, official charts, local notices, or collision-regulation compliance.

Installation Considerations

Install the pedestal with a compatible three-, four-, or six-foot Cyclone Pro array on a rigid level platform with complete rotating-array clearance. Mount at a practical height above the waterline, align the scanner parallel to the waterline, and keep it clear of masts, rigging, antennas, exhaust, lighting, and crew areas. Maintain manufacturer-specified personnel safe distance and compass-safe distance. Radar installation and commissioning should be completed by a qualified marine-electronics technician.

Before Ordering

Confirm selected compatible Cyclone Pro array length, approved Raymarine MFD, RayNet Ethernet cable and network layout, 10.2V to 31.2V supply, maximum 195W electrical capacity, mounting-platform strength, rotating-array clearance, mounting height, safe-distance requirements, heading and GPS sources for ARPA or overlay, cable package, and qualified installation requirements before purchase.