Lewmar CPX3 Vertical Windlass 12v Gypsy & Drum – 5/16″ G4 Chain 9/16″ Line

Description

A vertical gypsy and warping drum configuration gives theLewmar CPX3separate anchor rode and line-handling functions. The 1,000W motor runs on 12V DC and has a stated maximum pull of 1,808 lbs with a 452 lbs continuous working-load rating. Cast 316 stainless steel housing and a high-tensile alloy shaft form the listed deck and drive assembly.

The gypsy accepts 5/16 in G4 chain with 9/16 in three-strand or 8-plait rope. The controlled free-fall cone clutch manages the listed release function, while the manual override provides a separate manual-control feature. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Key Features of the CPX3 Gypsy and Capstan Windlass

• The 1,000W 12V DC motor powers the gypsy and warping drum.
• The gypsy accepts 5/16 in G4 chain for confirmed chain compatibility.
• The rope section handles 9/16 in three-strand or 8-plait rope.
• The warping drum provides separate line handling beside the anchor rode gypsy.
• The controlled cone clutch provides the listed free-fall release function.
• The manual override provides a separate stated manual-control option.
• The 452 lbs working-load rating identifies the continuous hauling load.
• The 1,808 lbs maximum pull figure states the peak pull rating.
• The rated no-load speed reaches 69 ft/min without a working load.
• The system requires a 110A circuit breaker for electrical protection.

Which Boats This Windlass Fits

The CPX3 gypsy and capstan windlass is recommended for cruisers and yachts from 38 to 50 ft. Its rope-to-chain gypsy requires 5/16 in G4 chain with 9/16 in three-strand or 8-plait rope. Each rode component must match the confirmed dimensions because the gypsy handles the chain links and rope section within the same anchor rode.

the listed maximum pull reaches 1,808 lbs. The separate 452 lbs working-load rating describes continuous hauling load. Boat owners should distinguish the peak-pull figure from the working-load figure when reviewing normal retrieval requirements.

Materials, Technology and Use

The cast 316 stainless steel housing forms the exposed vertical deck body, and the high-tensile alloy shaft supports the drive assembly. The IP67 rating applies to the listed motor and gearbox. The controlled free-fall cone clutch provides the listed release mechanism, while the warping drum offers a separate line-handling surface.

Salt, sand, and debris can still remain on stainless steel, the gypsy, the warping drum, and surrounding deck hardware. Clean and inspect these exposed components regularly. The 205 mm deck-unit height reflects the added gypsy and drum configuration.

Compatibility and Installation

The Lewmar vertical windlass mounts through decks from 1.0 to 2.0 in thick. It measures 205 mm high with a 182 mm base diameter and weighs 47.4 lbs. Installers should assess the mounting location, below-deck motor space, cable route, and access to the clutch before starting installation.

The 12V DC system draws an average of 100A and requires a 110A circuit breaker. the listed electrical demand makes onboard charger selection relevant during system planning. The provided product data does not confirm a switch, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the housing, gypsy, warping drum, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition, clutch area, and drum surface before operation. Inspect chain links, rope condition, manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The CPX3 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 5/16 in G4 chain with 9/16 in three-strand or 8-plait rope. You should compare your boat with the 38 to 50 ft application guide, measure deck thickness against the 1.0 to 2.0 in range, and allow for the 205 mm height, 182 mm base diameter, and 47.4 lbs dry weight. Verify that the 12V electrical system supports the listed 100A average draw and required 110A circuit breaker. Confirm package contents with the seller if you need controls, circuit protection hardware, anchor, chain, or rope.