Lofrans Project 1500 Vertical Windlass, Low Profile, Chrome, 5/16″ HT & BBB, 3/8″ HT – 1500W

Description

TheLofrans Project 1500combines a 1,500W 12V DC motor with a low-profile vertical gypsy-only arrangement. The windlass has a stated maximum pull of 2,800 lbs and a 463 lbs continuous working-load rating. Its mirror-polished chrome-plated bronze housing and AISI 316 stainless steel shaft form the listed deck and drive assembly.

The gypsy supports 5/16 in HT or BBB chain and 3/8 in HT or BBB chain. A manual friction clutch brake controls the listed release function. The provided product data does not confirm an anchor, chain, rope, controls, contactor, or circuit breaker as included.

Key Features of the Project 1500 Vertical Windlass

• The 1,500W 12V DC motor powers low-profile vertical anchor chain retrieval.
• The gypsy accepts 5/16 in high-test or BBB chain.
• The gypsy accepts 3/8 in high-test or BBB chain.
• The manual friction clutch brake controls the listed release function.
• The 463 lbs working-load rating identifies the continuous hauling load.
• The 2,800 lbs maximum pull figure states the product’s peak pull rating.
• The rated no-load speed reaches 82 ft/min without a working load.
• The windlass reaches 49 ft/min at its stated working-load rating.
• The motor enclosure carries the listed IP66 ingress-protection rating.
• A 125A circuit breaker is required for electrical protection.

Which Boats This Windlass Fits

The Project 1500 vertical windlass is recommended for motor cruisers and sailboats from 39 to 49 ft. Its gypsy supports 5/16 in or 3/8 in HT or BBB chain. Buyers should identify the exact chain diameter and grade before ordering because The available product details do not list rope compatibility.

the listed maximum pull is 2,800 lbs. The 463 lbs working-load rating provides the separate continuous hauling value. The continuous figure should guide regular retrieval assessment, while the maximum-pull figure remains a peak rating.

Materials, Technology and Use

The mirror-polished chrome-plated bronze housing forms the exposed deck body, while the AISI 316 stainless steel shaft supports the drive assembly. The IP66 rating applies to the listed motor enclosure, and the product data states CE approval. The manual friction clutch brake provides the listed release and braking function.

Salt deposits, sand, and debris can still collect around chrome-plated bronze, the stainless shaft, the gypsy, and deck hardware. Regular cleaning and inspection remain necessary. The low-profile gypsy-only arrangement does not include a capstan drum.

Compatibility and Installation

The Lofrans vertical windlass fits deck thicknesses from 1.2 to 2.0 in. The unit measures 110 mm above deck with a 190 mm base diameter and weighs 55 lbs. Installers should verify below-deck motor space, cable routing, mounting area, and clutch access before beginning installation.

The 12V DC electrical system requires a 125A circuit breaker. Installation planning can include battery charging evaluation around the listed voltage and circuit-protection requirement. The provided product data does not state average current draw or confirm controls, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the housing, gypsy, chain, and exposed shaft with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from chain links, the friction-clutch area, and deck hardware before operation. Inspect chain condition, clutch movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Project 1500 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether your chain is 5/16 in HT or BBB, or 3/8 in HT or BBB before ordering. You should compare your vessel with the 39 to 49 ft application guide, measure deck thickness against the 1.2 to 2.0 in range, and reserve room for the 110 mm above-deck height and 190 mm base diameter. Verify that your boat uses a 12V system and can use the required 125A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.