Garmin GC 255 Flush Mount Camera

Description

Keep the camera installation nearly flush with the surrounding surface using the Garmin GC 255 Flush Mount Camera. Its compact profile and 720p low-light video make it a practical choice for transoms, cockpits, bulkheads, bow areas, or other locations where a protruding bracket camera could be exposed to damage. Need a discreet camera view on a compatible Garmin display? The GC 255 supports Garmin Marine Network and composite video, operates from 9V–32V DC, and uses an IPX7-rated housing for marine installations.

Key Specifications

• Garmin GC 255 Flush Mount Camera, part number 010-02571-00.
• 1280 × 720 HD video output.
• Compact low-light camera with a wide-angle lens.
• Flush-mount profile for console, bulkhead, or transom installation.
• Supports Garmin Marine Network Ethernet and composite-video output.
• 9V–32V DC input with up to approximately 2.5W maximum power consumption.
• IPX7 water protection and operating range of 5°F to 131°F (-15°C to 55°C).
• Approximate dimensions: 2.4 × 2.0 inches; approximate weight: 0.48 lb (0.22 kg).
• Requires a suitable flush console or bulkhead cutout.

Integration

The GC 255 requires a compatible Garmin MFD, monitor, or video interface. Select either Garmin Marine Network or composite video based on the display system and installation plan. The camera is not a chartplotter, radar, GPS receiver, recorder, or wireless video device.

A flush-mounted fixed camera can be less exposed than a bracket-mounted option, but its view must be planned carefully before cutting the mounting hole. Image quality depends on lighting, glare, water spray, lens condition, cable quality, display resolution, and camera placement.

Installation Notes

Confirm the required cutout dimensions and rear clearance before drilling into a console, bulkhead, or transom. Test camera framing with the intended location, then ensure the flush face has a clear view without interference from rails, lines, seating, exhaust, or deck equipment.

Use sealed cable runs, suitable strain relief, correctly protected 9V–32V DC power, and marine-grade hardware. Inspect the lens, mounting gasket, rear connections, and cable seals regularly, especially after heavy spray or washdown.

Before Ordering

Confirm compatible Garmin display support, Ethernet or composite-video requirements, available mounting depth and cutout space, 9V–32V power supply, desired field of view, cable route, and required connectors or adapters before ordering.