Iris IP Camera Recorder w/IrisControl f/Garmin OneHelm Host – 1TB HDD – 32 IP Camera Inputs

Description

Bring multi-camera video management into a compatible Garmin helm with the Iris 32-Channel IP Camera Recorder featuring IrisControl for Garmin OneHelm. This 1TB NVR is designed for boats that want to monitor and manage up to 32 IP camera feeds through a Garmin MFD instead of relying only on a separate recorder monitor. Need onboard camera control integrated with the navigation display? The IRIS-NVR-32-OH-1TB combines high-capacity IP recording, IrisControl software, Garmin Marine Network connectivity, and up-to-4K local HDMI/VGA output.

Key Specifications

• Iris Innovations IP Camera Recorder with IrisControl for Garmin OneHelm, model IRIS-NVR-32-OH-1TB.
• 32-channel IP network video recorder with built-in IrisControl software.
• Designed for Garmin OneHelm integration with compatible Garmin MFD host systems.
• Includes 1TB internal hard-drive storage.
• Supports up to 4K Ultra HD monitor output through HDMI or VGA.
• Uses Garmin Marine Network Ethernet, HDMI, VGA, and USB connections.
• 12V/24V DC operating input with up to approximately 35W maximum power consumption.
• IP30 enclosure for dry, protected interior installation only.
• Operating temperature range of 14°F to 122°F (-10°C to 50°C).
• Approximate dimensions: 12.6 × 9.4 × 2.8 inches; approximate weight: 5.7 lb (2.6 kg).

Integration

This NVR requires compatible IP cameras, a suitable Ethernet network, and a Garmin MFD that supports the required OneHelm integration. Confirm Garmin MFD model, software version, network topology, IrisControl licensing or configuration requirements, camera protocols, bandwidth, and PoE arrangements before ordering.

The recorder does not include cameras, a Garmin MFD, PoE switch, wireless connection, or guaranteed video-storage duration. Retention time varies with camera count, resolution, frame rate, bitrate, motion recording, compression, and storage-overwrite settings.

Installation Notes

Install the NVR in a dry, ventilated, interior helm compartment, equipment rack, or protected bulkhead location. Provide space for cooling, hard-drive service, HDMI/VGA monitor access, Gigabit Ethernet connections, and secure 12V/24V power wiring. Keep the enclosure away from direct spray, bilge water, engine heat, and high-vibration locations.

Use properly planned network switching, label all camera and network cables, protect every cable run from chafe and heat, and configure secure user access. A qualified marine-electronics installer should complete Garmin OneHelm setup, IP addressing, camera discovery, recording rules, and system testing.

Before Ordering

Confirm Garmin OneHelm and MFD compatibility, available Garmin Marine Network capacity, IP camera count and protocols, PoE/network-switch requirements, 1TB retention expectations, monitor-output needs, 12V/24V power capacity, and protected mounting space before ordering.