Iris IRIS402 HD 3MP IP 1.8mm Lens Mini Dome Camera

Description

Cover a broad onboard area from one compact camera position with the Iris IRIS402 3MP IP Mini Dome Camera and its ultra-wide 1.8 mm fisheye lens. The 3MP 2048 × 1536 image can capture more of a cockpit, cabin, engine-space entrance, boarding zone, or deck passage where a conventional fixed lens may leave blind spots. Need wide surveillance coverage through a wired camera network? The IRIS-402-18 supports Ethernet IP, ONVIF compatibility, PoE, and a compact IP67 marine enclosure.

Key Specifications

• Iris Innovations IRIS402 HD 3MP IP Mini Dome Camera, model IRIS-402-18.
• 2048 × 1536 3MP high-definition video output.
• Ultra-wide 1.8 mm fisheye lens.
• Wired Ethernet IP video through RJ45 with ONVIF compatibility.
• Supports 12V DC power and Power over Ethernet.
• IP67 weather-resistant marine enclosure.
• Up to approximately 5W maximum power consumption.
• Operating range of -13°F to 131°F (-25°C to 55°C).
• Approximate dimensions: 3.3 × 2.2 inches; approximate weight: 1.0 lb (0.45 kg).
• Suitable for surface or ceiling mounting.

Integration

The IRIS402 needs a compatible MFD, monitor, NVR, or IP-video viewer. It is not a chartplotter, recorder, radar, GPS receiver, wireless camera, or NMEA 2000 device. Verify ONVIF support, network capacity, PoE budget, camera codec compatibility, and the intended display resolution before installation.

The fisheye lens captures a broad scene but can create visible barrel distortion and makes distant objects appear smaller. It is a fixed camera without pan, tilt, or optical zoom, so mount selection has a major effect on its practical coverage.

Installation Notes

Position the camera high enough to take advantage of its wide field of view, then test framing before drilling. Avoid mounting where rails, hardtop supports, lights, antennas, rigging, or exhaust obstruct the image. Use sealed cable entries and protected network wiring away from moisture, abrasion, heat, and high-current cables.

Use appropriate marine-grade hardware and confirm that a PoE switch or injector can supply the combined power requirements of every network camera. Clean the dome regularly and inspect seals, mounting fasteners, and connectors after saltwater operation.

Before Ordering

Confirm compatibility with the chosen MFD/NVR, Ethernet and PoE capacity, the need for ultra-wide fisheye coverage, surface or ceiling mounting location, desired display resolution, and cable-routing requirements before ordering.